FHV HIGH PRESSURE SCREW-ON

Product catalog summary

Features: The FHV high-pressure screw-on system allows connection by screwing together two parts and disconnection by pulling back the female safety sleeve and unscrewing. It features a flat valve shut-off system and can connect with the male part under residual pressure (35MPa-5075PSI) without tools. Disconnection under pressure is allowed, and the system is interchangeable according to Faster internal standards. No spillage occurs during connection and disconnection. The female part is equipped with axial rotation adapters, and mating threads are heat-treated with an Rd profile. High volume flow and reduced pressure drop are ensured by specially designed components.

Technical Specifications: The female part is made of high-grade steel with carbonitrited wearing parts, while the male part is made of high-grade carbon steel, induction hardened. The system operates within a temperature range of -25°C to +100°C (-13°F to +212°F) and can withstand 100,000 cycles at max rated working pressure when disconnected and 1,000,000 cycles when connected.

Performance Data: The system is available in various sizes with different maximum working pressures, flow rates, and burst pressures. For example, the 3/8” size has a max working pressure of 35 MPa (5075 PSI) and a flow rate of 32 l/min (9 GPM).

Materials and Accessories: The system uses polyurethane and NBR with a PTFE backup ring. Dust protections are available in PVC and aluminum for different sizes.

Comparison with Market Alternatives: The FHV system features a zinc-nickel surface treatment for enhanced corrosion resistance (1000h red corrosion) compared to zinc plating (300h red corrosion) in alternative products. It includes a safety sleeve system and is user-friendly, allowing connection by hand up to 35MPa of male side residual pressure.

Contact Information: Faster S.p.A. has headquarters in Italy and subsidiaries in Brazil, India, the USA, and China, with representative offices in various countries including Germany, Switzerland, Austria, Belgium, the Czech Republic, and Japan.

Catalog excerpts

INNOVATION TECHNOLOGY RESEARCH SAFETY COMMUNICATION LEADERSHIP HIGH PRESSURE

Open the catalog to page 1

Connection by screwing together the two parts. Connessione avvitando maschio e femmina. Verbindung durch Verschrauben der beiden Teile Connexion en dévissant les deux parties Disconnection by pulling back the female safety sleeve and unscrew. Disconnessione mediante arretramento ghiera di sicurezza della parte femmina e svitare. Entkuppeln durch zurückschieben der Sicherheitsschiebehülse Déconnexion en tirant la bague de securité femelle et dévisser Shut off by flat valve Sistema di tenuta mediante valvole a faccia piana Schließen durch flache Ventile Clapet à Face Plate Connectable with male...

Open the catalog to page 2

Representative offices: France: François Divet F-35200 Rennes 11, Rue Jean Bras Phone (+33) (0) 2.99.51.44.94 [email protected] Germany - Holland - Denmark: Stephan Selkes D-45329 ESSEN Karlstrasse, 155 Phone (+49) (0) 201 2946510 - Fax (+49) (0) 201 2946511 [email protected] Germany - Switzerland - Austria: Hubert Stoll D-89601 SCHELKLINGEN Sommerberg 15 Phone (+49) (0) 7394 933135 - Fax (+49) (0) 7394 933136 [email protected] Germany - Belgium - Czech Republic: Mario Blumenkamp D-47249 DUISBURG Sittardsberger Allee 110 Phone (+49) (0) 203 98418906 [email protected] Japan:...

Open the catalog to page 3

All FASTER S.p.A. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list