1. Catalogs
  2. Fassi gru S.p.A
  3. F85B.0 - F85B.1 - F85B.2
video corpo

F85B.0 - F85B.1 - F85B.2

F85B.0 - F85B.1 - F85B.2
1 / 32 PagesView full catalog

F85B.0 - F85B.1 - F85B.2

Product catalog summary
Overview: The document details the specifications and features of the F85B crane series, which includes models F85B.0, F85B.1, and F85B.2. These models are tailored for specific lifting capacities and outreach capabilities, utilizing Hydrocontrol HC/D4 segmented distributor banks.
Specifications:
  • F85B.0: Lifting capacity of up to 8.56 tm, maximum outreach of 12.60 m with jib, dimensions of width 2.25 m, length 0.70 m, height 1.95 m, and rotation of 400°.
  • F85B.1: Lifting capacity of up to 8.10 tm, maximum outreach of 16.55 m with jib, dimensions of width 2.35 m, length 0.75 m, height 2.15 m, and rotation of 410°.
  • F85B.2: Lifting capacity of up to 8.20 tm, maximum outreach of 16.55 m with jib, dimensions of width 2.35 m, length 0.75 m, height 2.15 m, and rotation of 410°.
Features:
  • Base: Cast iron base for optimal stress distribution and resistance.
  • Booms Guide: Extension booms guide shoes for reduced clearance and increased durability.
  • Tank: Plastic tank resistant to shocks and corrosion.
  • Outrigger: Manual extendable outrigger available in various widths.
  • Version C: Shorter secondary arm for greater lifting height.
Optional Equipment:
  • Radio Remote Controls: Digital generation for operational control and communication.
  • FX100 System: Optional system for load condition monitoring and overload prevention, available with analog radio.
  • Work Light: Versatile light for safe operation in low light conditions.
  • Jib: Additional hydraulic articulation for increased reach.
  • Seat: Ergonomic seat with adjustable positions and optional heating.
  • Winch: Cable-operated device with torque and end stop limiter system.
Standards: The cranes comply with EN 12999:2011, classified under HC1 HD4 S2 when installed on trucks.
FX100 System Overview: The FX100 system is an optional feature for cranes not equipped with mandatory control systems in EC countries, targeting non-EC markets. It informs operators about crane load conditions and blocks operation in case of excessive overload. The system can be paired with an analog radio remote control, with a 'W' version available for cold climates.
Linkage System: The linkage system on crane articulations maintains a constant lifting moment, enhancing both dynamic lifting and static capacity.
Additional Crane Features:
  • Base: Made of cast iron for optimal stress distribution and fatigue resistance.
  • Booms Guide: Features extension booms guide shoes with reduced clearance for durability.
  • Tank: Constructed from plastic, resistant to shocks and corrosion.
  • Outriggers: Available in manual and hydraulic extendable versions, including 'Extra wide' and 'Super Extra wide' options.
  • Version C: Features a shorter secondary arm for greater under-hook lifting height, suitable for bulky and heavy loads.
Optional Features:
  • Work Light: A powerful, versatile light for safe operation in low light conditions, controllable via remote or user panel.
  • Jib: An additional hydraulic articulation to increase crane outreach and move loads horizontally.
  • Seat: Ergonomic and adjustable for operator comfort, with a heated option.
  • Supplementary Functions: Includes high-quality hoses and a protective system for hydraulic accessories.
  • Winch: Equipped with a patented mechanical limiter system to prevent overload risks, featuring an anti-revolving cable and guide pulley.
See more

Catalog excerpts

F85B.0 - F85B.1 - F85B.2-1

FR 551 CRANES WITHOUT COMPROMISE

 Open the catalog to page 1
F85B.0 - F85B.1 - F85B.2-2

GB F85B.0 LIFTING CAPACITY: up to 8,56 tm MAX OUTREACH: up to 12,60 m withjib OVERALL DIMENSIONS: from: w. 2,25 m, l. 0,70 m, h. 1,95 m ELECTRONIC/HYDRAULIC EQUIPMENT: Hydrocontrol HC/D4 segmented distributor bank CHARACTERISTICS: active version (.0): without linkage rotation 400° with rack and pinion F85B.1 LIFTING CAPACITY: up to 8,10 tm MAX OUTREACH: up to 16,55 m withjib OVERALL DIMENSIONS: from: w. 2,35 m, l. 0,75 m, h. 2,15 m ELECTRONIC/HYDRAULIC EQUIPMENT: Hydrocontrol HC/D4 segmented distributor bank CHARACTERISTICS: dynamic version (.1): with linkage rotation 410° with rack and pinion F85B.2 LIFTING...

 Open the catalog to page 2
F85B.0 - F85B.1 - F85B.2-3

HUBMOMENT: bis 8,56 tm GRÖSSTE HYDRAULISCHE AUSLADUNG: bis 12,60m mit jib KRANAUSMÄßE: Aus: w. 2,25 m, l. 0,70 m, h. 1,95 m ELEKTRONISCHE/HYDRAULISCHE AUSRÜSTUNG: Hebelsteuerblock Hydrocontrol HC/D4 HAUPTMERKMALE: active Version (.0): ohne Kniehebelsystem Schwenkbereich 400° mit Zahnstange HUBMOMENT: bis 8,10 tm GRÖSSTE HYDRAULISCHE AUSLADUNG: bis 16,55 m mit jib KRANAUSMÄßE: Aus: w. 2,35 m, l. 0,75 m, h. 2,15 m ELEKTRONISCHE/HYDRAULISCHE AUSRÜSTUNG: Hebelsteuerblock Hydrocontrol HC/D4 HAUPTMERKMALE: dynamic Version (.1): mit Kniehebelsystem Schwenkbereich 410° mit Zahnstange HUBMOMENT: bis 8,20...

 Open the catalog to page 3
F85B.0 - F85B.1 - F85B.2-5

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

 Open the catalog to page 5
F85B.0 - F85B.1 - F85B.2-6

BASE - Cast iron base and lower column section for ideal stress distribution and greater resistance. The absence of welds provides the crane with characteristics of exceptional duration to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione di ghisa per un ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldatura conferisce alla gru eccezionali caratteristiche di durata alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance plus importante....

 Open the catalog to page 6
F85B.0 - F85B.1 - F85B.2-7

KRANSOCKEL - Kransockel und Ritzel aus Gusseisen dienen der idealen Spannungsverteilung und bieten eine sehr gute Widerstandsfähigkeit. Da keine Schweißnähte vorhanden sind, ist der Kran ungewöhnlich beständig gegen Ermüdungserscheinungen. BASE - Base y parte inferior de la columna de fundición de hierro colado para una distribución ideal de los esfuerzos de carga y resistencia superior. La ausencia de soldaduras confiere a la grúa características excepcionales de resistencia a la fatiga. BASIS - Kraanvoet en onderzijde kolom uit gietstaal voor ideale spanningsverdeling en grotere weerstand....

 Open the catalog to page 7
F85B.0 - F85B.1 - F85B.2-9

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

 Open the catalog to page 9
F85B.0 - F85B.1 - F85B.2-10

BASE - Base and lower part of the column in cast steel for perfect stress distribution and greater resistance. The absence of welding ensures that the crane offers excellent characteristics of durability to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione d’acciaio per un’ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldature conferisce alla gru eccezionali caratteristiche di durata alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance...

 Open the catalog to page 10
F85B.0 - F85B.1 - F85B.2-11

KRANSOCKEL - Kransockel und unterer Teil der Säule aus Gusseisen dienen der idealen Spannungsverteilung und bieten eine sehr gute Widerstandsfähigkeit. Da keine Schweißnähte vorhanden sind, ist der Kran ungewöhnlich beständig gegen Ermüdungserscheinungen. BASE - Base y parte inferior de la columna de fundición de hierro colado para una distribución ideal de los esfuerzos de carga y resistencia superior. La ausencia de soldaduras confiere a la grúa características excepcionales de resistencia a la fatiga. BASIS - Kraanvoet en onderzijde kolom uit gietstaal voor ideale spanningsverdeling en grotere...

 Open the catalog to page 11
F85B.0 - F85B.1 - F85B.2-13

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

 Open the catalog to page 13
F85B.0 - F85B.1 - F85B.2-14

BASE - Cast iron base and lower column section for ideal stress distribution and greater resistance. The absence of welds provides the crane with characteristics of exceptional resistance to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione di ghisa per un ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldatura conferisce alla gru eccezionali caratteristiche di resistenza alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance plus...

 Open the catalog to page 14

All Fassi gru S.p.A catalogs and technical brochures

  1. MICRO SERIE

    24  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.