F110B.0 LIFTING CAPACITY: up to 9,9 tm MAX OUTREACH: up to 16,60 m with jib OVERALL DIMENSIONS: l 0,75 m, w 2,35 m, h 2,20 m ELECTRONIC/HYDRAULIC EQUIPMENT: Hydrocontrol HC/D4 segmented distributor bank CHARACTERISTICS: active version (.0): without linkage rotation 410° with rack and pinion GB F110B.1 LIFTING CAPACITY: up to 9,9 tm MAX OUTREACH: up to 18,60 m with jib OVERALL DIMENSIONS: l 0,75 m, w 2,35 m, h 2,20 m ELECTRONIC/HYDRAULIC EQUIPMENT: S800 distributor bank CHARACTERISTICS: dynamic version (.1): with linkage rotation 410° with rack and pinion GB F110B.2 LIFTING CAPACITY: up to 10,0...

HUBMOMENT: bis 9,9 tm GRÖßTE HYDRAULISCHE AUSLADUNG: bis 16,60 m mit jib KRAN MAßE: l 0,75 m, w 2,35 m, h 2,20 m ELEKTRONISCHE/HYDRAULISCHE AUSRÜSTUG: Sandwichsteuerblock Hydrocontrol HC/D4 HAUPTMERKMAL: dynamic Version (.1): mit hebelsystem Schwenkwerk 410° mit Zahnstange und Ritzel HUBMOMENT: bis 9,9 tm GRÖßTE HYDRAULISCHE AUSLADUNG: bis 18,60 m mit jib KRAN MAßE: l 0,75 m, w 2,35 m, h 2,20 m ELEKTRONISCHE/HYDRAULISCHE AUSRÜSTUG: Hydraulischer Steuerblock S800 HAUPTMERKMAL: dynamic Version (.1): mit hebelsystem Schwenkwerk 410° mit Zahnstange und Ritzel HUBMOMENT: bis 10,0 tm GRÖßTE HYDRAULISCHE...

* Compulsory for EU market - Obbligatorio per mercato europeo - Obligatoire pour les marchés de l’UE - Für den europäischen Markt erforderlich - Requerido para el mercado europeo - Vereist voor Europese mar

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

BASE - Cast iron base and lower column section for ideal stress distribution and greater resistance. The absence of welds provides the crane with characteristics of exceptional duration to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione di ghisa per un ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldatura conferisce alla gru eccezionali caratteristiche di durata alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance plus importante....

FUNDAMENT - Fundament und Ritzel aus Gusseisen dienen der idealen Spannungsverteilung und bieten eine sehr gute Widerstandsfähigkeit. Da keine Schweißnähte vorhanden sind, ist der Kran ungewöhnlich beständig gegen Ermüdungserscheinungen. BASE - Base y parte inferior de la columna de fundición de hierro colado para una distribución ideal de los esfuerzos de carga y resistencia superior. La ausencia de soldaduras confiere a la grúa características excepcionales de resistencia a la fatiga. BASIS - Kraanvoet en onderzijde kolom uit gietstaal voor ideale spanningsverdeling en grotere weerstand. Door...

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

BASE - Cast iron base and lower column section for ideal stress distribution and greater resistance. The absence of welds provides the crane with characteristics of exceptional duration to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione di ghisa per un ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldatura conferisce alla gru eccezionali caratteristiche di durata alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance plus importante....

FUNDAMENT - Fundament und Ritzel aus Gusseisen dienen der idealen Spannungsverteilung und bieten eine sehr gute Widerstandsfähigkeit. Da keine Schweißnähte vorhanden sind, ist der Kran ungewöhnlich beständig gegen Ermüdungserscheinungen. BASE - Base y parte inferior de la columna de fundición de hierro colado para una distribución ideal de los esfuerzos de carga y resistencia superior. La ausencia de soldaduras confiere a la grúa características excepcionales de resistencia a la fatiga. BASIS - Kraanvoet en onderzijde kolom uit gietstaal voor ideale spanningsverdeling en grotere weerstand. Door...

GB The FX100 system (optional) has been made with the aim to provide, on cranes not equipped with control systems compulsory in the EC markets and then for the extra EC countries, with a system able to inform the operator about the load condition of the crane and block it in case of an excessive overload is reached. The system is available with analog radio. A lifting moment limiting device version called “W” can be supplied for countries with cold climate condition. IT Il sistema FX 100 (opzionale) è stato realizzato con lo scopo di dotare le gru non provviste dei sistemi di controllo obbligatori...

BASE - Cast iron base and lower column section for ideal stress distribution and greater resistance. The absence of welds provides the crane with characteristics of exceptional duration to fatigue. BASAMENTO - Basamento e parte inferiore della colonna in fusione di ghisa per un ideale distribuzione delle sollecitazioni e per una resistenza superiore. L’assenza di saldatura conferisce alla gru eccezionali caratteristiche di durata alla fatica. EMBASE - Embase et partie inférieure de la colonne en fusion de fonte pour avoir une répartition optimum des sollicitations et une résistance plus importante....