Products catalogue
22Pages

PRODUCTS CATALOGUE

Analog speed controllers - Wall solutions 3 Digital speed controllers - Wall solutions 4 Analog and digital speed controllers - Wall and Built-in controllers for condensing oven hoods 9 Inverters for induction single-phase motors 11 SOLUTIONS FOR THE AIR QUALITY CONTROL 12 CONTROLLERS FOR PROFESSIONAL AND INDUSTRIAL EMBEDDED SYSTEMS AND DEVICES 20 UVGI SYSTEMS FOR THE ENVIRONMENTAL SANITATION 21

AIR INTAKE CONTROLLERS Applications Air intake systems and air quality control systems in indoor environments request aspiration groups with single-phase induction of small and medium power which make use of simple, cheap and common motors. Analog speed controllers - Wall solutions Codes: FE229, FE263, FE282 Technical features FE229 Supply Bipolar switches and rotating button Bipolar switches and rotating button Bipolar switches and rotating button Protection degree Protection fuse

Digital speed controllers - Wall solutions Codes: FE230, FE230/T, FE230/R, FE230/S, FE230/C Provided with radio receiver for the handling of a radio control Radio control Provided with NTC, radio receiver and port RS-485 Technical features Consumption in stand-by (loads off) Protection degree Protection fuse Radio receiver

NEW: Digital speed controller for single-phase induction motors 10 A - Wall solutions Code: FE1023 Power supply voltage 85/265V-50Hz. Maximum load MOTOR 10 A. Maximum load LIGHTS 2 A. Management of gas solenoid valve. Electronic control system with microprocessor. Bipolar main switch. 5 keys keyboard for setting and control functions. Low consumption (loads off). MIN and MAX speed calibration procedure. Protection fuse. IP50 protection. Size: 195x180x77

Analog and digital speed controllers - Built-in solutions The built-in controllers proposed are versatile and efficient microprocessor systems that allow the handling of air intake motors to ensure the regular air exchange in all the indoor environments. The numerous devides are able to meet the most different needs, thanks to the differents kinds of user interfaces available, the possibility to handle optional inputs and outputs and the ability to combine a polycarbonate mask. FEGR016: Analog speed controller for 900 W motors Polycarbonate mask Code FE1016 optional FEGR017: Digital speed...

FEGR048: Analog speed controller for 350 W motors Polycarbonate mask Code FE1016 optional FEGR020: Digital speed controller for 350 W motors Polycarbonate mask Code FE1015 optional FE1008: Speed controller for 350 W motors The motor speed, controlled by the regulator, can be varied through a potentiometer (optional), or through an input 0-10 V: this last management mode is useful in a wide range of applications and in particular, for a control through PLC. Technical features: Supply: 220-240Vac - 50/60Hz.  MAX absorption of the MOTOR: 350 W.  Phase partialization system for the motor...

Phase partialization system for the motor management ON/OFF lights control through the relè User interface Keypad 2 keys and rotary knob Keypad 2 keys and rotary knob Possibility of customize the firmware Flat cable 10 pins L=310mm with sheath Visual signals 7 segments display with red and yellow led 7 segments display with red and yellow led 7 segments display with red and yellow led Polycarbonate panel Voltage load on/off through triac Inputs/outputs for sensors and/or external commands Note: Always pay attention to the ventilation of the regulator, especially for absorbed power close to...

Built-in controllers for condensing oven hoods For those particular applications that require to vary the air flow very quickly and without the intervention of an operator, a typical thing for oven hoods, it is available a specific family of built-in electronic systems specially designed to automatically change the speed of the suction motor in function of the operating conditions, with evident advantages in terms of efficiency and energy saving. FEGF01 ON / OFF of the hood and automatic passage from a speed of the motor to another depending on the temperature values acquired by the two...

FEGR018 ON / OFF of the motor through dedicated keys.  ON / OFF of the lights through dedicated key.  ON / OFF of the solenoid valve through dedicated key.  Nr. 1 temperature sensor PT1000.  Automatic activation of the maximum speed, depending on the temperature detection.  Manual activation on the maximum speed through dedicated key.  Temperature thresholds fixed but customizable on request.  Unmanaged function Unmanaged function Microprocessor control system Phase partialization system for the motor management ON/OFF control of the solenoid valve Unmanaged function Unmanaged...

Inverters for induction single-phase motors Codes FE1018, FE1019. Nowadays the inverter is the technology that provides the best energy efficiency regarding the realization of variable flow systems. When are required performances such as: - Efficiency and economy of operating: minimum consumption with maximum efficiency. - Reliability. - Quietness. - Maximum operating dynamics. - Ease of installation and adjustment. Complete series for motors from 200 W to 1500 W… Customizable performances Technical Features Bipolar switch and rotary knob Bipolar switch and rotary knob Radio connection...

SOLUTIONS FOR THE AIR QUALITY CONTROL The unit FE1011 is intended for the smart control of air quality in indoor environments. Taking advantage of the serial communication channel RS485, it is possible to realize a home automation system constituted by the sensor modules FE1017 and the digital speed regulators FE230/S and FE230/ The FE1017 module is a device that can integrate up to four different types of sensors, that allow you to as- sess air quality in indoor environments by measuring tem- perature, humidity, ozone concentration.

CONTROLLERS FOR REFRIGERATION RAL073_AA: Electronic control board for professional cabinets The electronic controller RAL073_AA is intended for the management of professional cabinets used for drying and aging food products. The management software of the electronic control board provides the performance of the dripping, drying and seasoning phases. The device integrates a self-diagnostic system that allows to detect and communicate to the user, thanks to appropriate alarm signals, probe’s failures and to the door opening system. Power supply 230 VAC +/-10%, 50/60 Hz. Electronic control...