FUNCTIONAL ANI) TECHNICAL SPECIFICATIONS OF THE ELECTRONIC BOARD FOR RETARDER PROVER In. FE1030 or FE1036
10Pages

FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it FUNCTIONAL AND TECHNICAL SPECIFICATIONS OF THE ELECTRONIC _BOARD FOR RETARDER PROVER p/n. FE1030 or FE1036_ HARDWARE SPECIFICATIONS electronic board The kit proposed for the retarder retarder control application consists of: • a basic board, which integrates the relays for the actuations and manages the digital and analog inputs; • a front board, which includes 4 mechanical keys, 6 digits divided into two pairs of 3 digits each, an 2x24 alphanumeric LCD display; (Please note: in the FE1036 version the front board is provided in a sealed box) • an NTC temperature probe complete with wiring; • a humidity probe complete with wiring. • wiring for connection between base board and front board. The wiring for the power supply is not provided: supply power (85Vac-265Vac / 50Hz-60Hz) to the base board using the appropriate screw terminal (2-pole connector CN1). No external mask is provided. PLEASE NOTE: Read the following instruction manual carefully. The working parameters currently set by default are a standard configuration, check and possibly configure the parameters appropriately for your application. P.IVA! 0202 1 450420 - R.E.A. N° 1 554D8 ANCONA - REG.lMPRESE N° 1 5DS5 ANCONA CAPI TALE sociale: €. 62.000

r.FASAR F»elettronica AZIENDA CERTIFICATA UNI EN ISO 9001: 2015 Connection scheme of the base board: FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it ALLA SCHEDA FRONT ALE uSWl (APERTURA PORTA) Base board dimensions (in mm) p.iva: D2D2 1 45D42Q - R. E.A. n° 1 554D8 Ancona - Reg. Impress n°1 5085 Ancona capitale sqciale: €, 62.DDD

FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it CZFASAR F™elettronica AZIENDA CERTIFICATA UNI EN ISO 9001: 2015 Front board dimensions (in mm) In this document, the four keys on the front board will be identified, starting from the left, as follows: - SW1: "back" main functions: return to stand-by condition, exit the menus - SW2: "+" main functions: increase values / scroll up menu items - SW3: “-” main functions: decreasing values / scrolling down the menu items - SW4: "select" main functions:...

FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it \z AZIENDA CER - access to the MAIN MENU to select one of the machine operating modes (manual and automatic programs) or the settings of the installer parameters protected by password. ACCESS TO TIME / DATE SETTING MODE With the machine in stand-by, press and hold the "select" button for 3 seconds: the second line of the display shows the time, with the digits representing the hours flashing; press or...

FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it fz AZIENDA CER - if temperature modification is enabled, then you return to the manual programs menu; - if humidity modification is enabled, then humidity modification is disabled and temperature modification is enabled; - if the humidity setpoint value has already been confirmed (therefore both temperature modification and humidity modification is disabled), then the modification of the humidity...

FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it rz AZIENDA CER must first go back (using the "+" key, to be pressed when the modification of any parameter is not enabled) to the first setting screen (the one in which the cycle end time is defined) and then press "back". When the last screen for setting the parameters is filled, the start of a program is controlled with the "select" key, the system calculates the duration of the Rest Phase (parameter...

FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it rz AZIENDA CER At the beginning of the Rest Phase, a defrost is performed after a time given by the parameter "Postpone 1st Defrost.": The subsequent defrosts take place at regular intervals as established by the parameter "Interval. Defrosts” settable by user. All defrosts have a duration defined by the "Defrost Duration" parameter that can be set by the user. Phase 3: Fermentation Dead zone...

FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it rz AZIENDA CER When you open the door the fans turn off. In defrost, dripping and fan stop, the fans are off. CELL LIGHT The cell light output is automatically activated when the door is opened. PASSWORD PROTECTED INSTALLER PARAMETERS SETTING From the main menu choose the SETTINGS item; when prompted for the password, enter pin 4791: to do this, use the "+" and "-" keys to change the value of the...

FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it ri FASAR F»elettronica AZIENDA CERTIFICATA UNI EN ISO 9001: 2015 LIST OF OPERATING PARAMETERS P.IVA! 0202 1 450420 - R.E.A. N° 1 554D8 ANCONA - REG.lMPRESE N° 1 5DS5 ANCONA CAPI TALE sociale: €. 62.000

FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it FASAR elettronica IFICATA UNI EN ISO 9001: 2015 FAULTY TEMPERATURE PROBE If an alarm occurs due to a faulty temperature probe, the system stops the program in progress and goes back to stand-by, a continuous acoustic signal is emitted for a minute that can be silenced by pressing any key. During the alarm sound, the display shows the alert message for a faulty temperature probe: once the buzzer has stopped (because it has been silenced by pressing a...