USER INFORMATION MANUALE D'USO

UNIDECK ALLUMINIUM PANEL SLAB FORMWORK

UNIDECK | ALLUMINIUM PANEL SLAB FORMWORK A PERFECT SYSTEM FOR YOUR JOB Based on a solid thirty years’ experience as a producer, Our company produces technological equipment for the building industry. Engineering, design and testing are at the basis of every project carried out by our company. FORMWORK FOR CLOSED PANEL SLAB Choice of quality materials, in-house production and rigorous testing operations are the prerogatives for our high quality products. Studied for the most demanding construction sites, where velocity, firmness, flexibility and technology must be a whole with the product. The...

UNIDECK | ALLUMINIUM PANEL SLAB FORMWORK ADVANTAGES OF THE UNIDECK SYSTEM SYSTEM COMPONENTS We decided to keep faith to its technological commitment, producing a single combined system for the fulfilment of every type of slab; for this reason the UNIDECK panel integrates perfectly with the Lajflex system and all its accessories, allowing the technological growth of its customers without a continuous replacement of the components. Lowering head UNIDECK closed panel 42x150 UNIDECK closed panel 37,5x150 UNIDECK closed panel 75x75 A few simple procedures allow the assembly of the 3 main elements...

UNIDECK | ALLUMINIUM PANEL SLAB FORMWORK ASSEMBLY AND DISASSEMBLY OF THE UNIDECK STRUCTURE Props, main beams and UNIDECK panels placement ASSEMBLY AND DISASSEMBLY OF THE UNIDECK STRUCTURE

UNIDECK | ALLUMINIUM PANEL SLAB FORMWORK IF PROP LOADS WITH DROPHEAD UNIDECK PROP LOADS WITH DROPHEAD UNIDECK *Load according to DIN EN 4421: Total load Q = Q1 + Q2 + Qv Dead load Q1 = 0,20 kN/m2 **Deflection according to DIN 18202 Concrete load Q2 = 0,26 kN/m3 x D (cm) Variable load Qv = 0,2 x Q2 ❖ 1,50 kN/m2

UNIDECK | ALLUMINIUM PANEL SLAB FORMWORK LAJFLEX - UNIDECK INTEGRATION Making the system combined was the basic concept of our design engineers; the great result achieved is the complete integration of a system with the others, allowing the designer to establish, depending on the project requirements, which system is worth using. We also have a flexibility at the highest levels, never achieved before in the field of slab formworks. UNIDECK MAIN COMPONENTS Cod. 700-2024 LOWERING HEAD Main element of the system, with lowering. Base plate for standard props. With hookings to place the beam from...

THE FORMWORK SRL Via Achille Grandi, 7 - 20097 San Donato Milanese (Milano) - Italy Tel. +39 02 5275829 - 02 5279974 - Fax +39 02 55600291 [email protected] | www.theformwork.it