*mydirectindustry

Catalogs
Farina Formworks ITALY | Formworks | Props | Scaff
FRAMED FORMWORK DESTIL

FRAMED FORMWORK DESTIL

Product catalog summary

Overview
The document is a comprehensive user manual for the Destil framed formwork system, highlighting its features, specifications, and usage instructions. It is engineered for efficient concrete construction, emphasizing modularity, high compatibility, and reduced labor costs.

Specifications

Material: Constructed from hot-rolled steel S355MC with a thickness of 2.50 mm and a hot zinc-coat finish.
Admissible Load: Supports 80 kN/m² with D 20 Tie-Rods and 60 kN/m² with D 15 Tie-Rods.
Panel: Made from 18 mm birch multilayer or plastic-coated plywood.
Frame Depth: 123 mm.
Panel Heights: Available in 300 cm, 120 cm, 330 cm, 270 cm, and 135 cm.

Features

Modularity: Offers a wide range of sizes and compatibility with other systems.
Low Density of Tie Rods: Requires only two tie rods for panels up to 300 cm, reducing assembly time.
Fast Connection: Equipped with quick-acting and multifunction clamps for easy panel connection.
Versatility: Suitable for various construction types including vertical, horizontal, and climbing formworks.
Durability: Features hot deep galvanized frames for extended lifespan.
Speed: Reduces construction time by 25% compared to conventional methods.

Safety Warnings

Compliance with local safety regulations is mandatory.
Instructions must be available on-site for all operators.
Regular checks are necessary, especially after severe weather conditions, to ensure system stability.

Assembly and Usage
Detailed instructions for assembling, using, and dismantling the formwork are provided. The system includes various components like panel struts, corners, and lifting instructions. Accessories are interchangeable and compatible with other systems.

Technical Assistance
Pre-and post-sale technical support is available.

Conclusion
The Destil framed formwork system is designed to enhance construction efficiency and reduce costs through its innovative design and compatibility with existing systems.

Formwork Accessories and Components
This section provides detailed specifications and descriptions of various formwork accessories and components used in construction, including product codes, descriptions, weights, and specific applications for each item.

Specifications

Quick Acting Clamps: Used for quick fastening, available in different models with a weight of 3.50 kg.
Super Plate Nuts: Available in different diameters (ø150, ø130, ø110) with weights ranging from 0.70 kg to 1.50 kg.
Hexagon Nuts: Used for securing formwork, available in lengths of 50 mm and 70 mm, weighing 0.30 kg and 0.32 kg respectively.
Universal Waling: Used for securing formwork, available in lengths of 90 cm and 150 cm, with weights of 16.00 kg and 25.00 kg respectively.
Panel Struts: Used for vertical adjustment of formwork, available in lengths of 340 cm and 540 cm, with weights of 40.00 kg and 71.40 kg respectively.

Procedures and Applications

Formwork Assembly: Components like universal fixing bolts and corner walings are used to assemble and secure formwork structures.
Platform Construction: Hinged and fixed brackets are used for constructing casting and service platforms, ensuring stability and safety.
Vertical Adjustment: Panel struts and props extensions allow for precise vertical alignment of formwork, accommodating various heights and inclinations.

Recommendations

Ensure proper anchorage of formwork components to prevent turnover and ensure stability.
Maintain recommended distances between brackets and use appropriate safety measures when constructing platforms.

Key Data from Tables

Product codes and weights are provided for each component, facilitating easy identification and selection based on project requirements.
Admissible load capacities are specified for certain components, ensuring compliance with safety standards (e.g., DIN 18216).

Catalog excerpts

forms for your ideas USER INFORMATION MANUALE D'USO

Open the catalog to page 1

GAMMA DELLE DIMENSIONI 14 AVVERTENZE SULLA SICUREZZA SAFETY WARNINGS • The respect of these instructions does not exempt from compliance with all safety regulations in force in the country where you use the system. • These instructions are intended for users of TF products and systems. Each one must be aware of the contents of this manual; in case they have difficulties in reading the same, the employer has to provide education of the same • Il rispetto delle presenti istruzioni non esime dall'osservanza di tutte le norme sulla sicurezza vigenti nel paese dove si utilizzi il Sistema in oggetto...

Open the catalog to page 2

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL FEATURES Destil wall framed formwork is a new system for efficient concrete construction technology and is now available. DESTIL offers increased efficiency and reduces costs through the following: PANEL HEIGHTS: a wall formwork with wide modularity available in heights of 300 cm, 120 cm and 330 cm, 270 cm and 135 cm. Wide range for every sizes of steel frame. STEEL: highly resisting Steel, type S315MC. Frame depth: 123 mm Thickness: 2,50 mm Finishing technique: hot Zinc-coat MAX CONCRETE PRESSURE: 80 kN/m2 USING D 20 Tie-rods HIGH-QUALITY PLYWOOD:...

Open the catalog to page 3

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL IF DESTIL FRAMED FORMWORK CASSERO A TELAIO DESTIL Material: hot-rolled steel, highly resisting, type S355MC, according to regulation EN 10149 part 1/ part 2 and DIN EN 10051 Thickness: 2.50 mm Admissible load: Using D 20 Tie-Rods 80 kN/m2 Admissible load: Using D 15 Tie-Rods 60 kN/m2 Finishing technique: Hot Zinc-coat Panel: birch multilayer panel, 18 mm thick J Highly resistant steel frame, 123 mm high, with perimetral concavity adapted for insertion of connection clamps in any position. 3 Perimetric holes adapted and suitable for higher planting...

Open the catalog to page 4

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL DESTIL FORMWORK ELEMENT CONNECTION | COLLEGAMENTO DI ELEMENTI DESTIL FIXED BRACKET | MENSOLA DI GETTO FISSA Should be used for construction of casting platforms or service platforms together with steel floor planks with different spans (1140 mm, 1800 mm, 2500 mm). Fixed bracket is joined to the formwork structure with appropriate fixing head. It is recommended to maintain the distance between two brackets not greater than 1,8 meters. The work platforms should have timber board in the bottom, in the middle, and on the top of the vertical handrail...

Open the catalog to page 5

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL IF PLATE NUT D15 (0150) | DADO A PIASTRA D15 (0150) VERTICAL ELEMENTS ELEMENTI IN VERTICALE Used to fix corresponding formwork during the casting operations. Produced in standard length of 6 meters and cut to necessary length on the construction site. The bars can be reused after the works; but prior to casting, they should be put in plastic tube, type 22/26, and then can be reused. For correct usage the bar should be equipped with appropriate accessories (Super plate nuts or Hexagon nuts or Plate nuts D15). Admissible load: 90 kN (according to...

Open the catalog to page 6

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL DESTIL FORMWORK ELEMENT CONNECTION | COLLEGAMENTO DI ELEMENTI DESTIL CLOSURES UP TO 20 cm| COMPENSAZIONE FINO A 20 cm Wall compensation, from 0 to 20 cm, using wooden beam or wooden boards, multi function clamp for the connection of the elements and universal waling for alignment. Compensazioni da 0 a 20 cm con quadrotti o tavole di legno, morsa di compensazione per il collegamento dei moduli e la rotaia di fissaggio per l’allineamento. Multi function clamp cod. CC0009 Morsa di compensazione cod. CC0009 Wooden beam or boards Tavola o quadrotto...

Open the catalog to page 7

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL IF DESTIL FRAME FORMWORK ELEMENT Destil Framed Elements Logical modular system in steps of 15. The heights and the widths of the frame Destil elements form a modular system logical and simple to use that makes the formwork particularly flexible and cost effective. - easy planning and forming - adjustment of the height and width in steps of 15 cm - few compensations required - clear positioning of junctions. Only two anchors in height till an height of 3,00m, with elements of 3,30m only 3 anchors are required in height. Biggest distance between...

Open the catalog to page 8

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL IF PANEL STRUTS H=340 cm | PUNTELLO DI PIOMBA TURA H=340 cm MAXIMUM STRESS OF THE PANEL STRUT H=340 cm | SOLLECITAZIONIMASSIMEPER IL PUNTELLO H=340 cm Panel struts used for plumbing and installation operations. Panel Strut H=340 cm: minimum and maximum possible extension. Puntelli di piombatura per il sostegno e la messa in opera. Puntello di Sostegno H=340 cm: minima e massima estensione permessa. ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO 17 16 ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 9

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL IF PANEL STRUTS H = 540 cm | PUNTELLO DI PIOMBATURA H=540 cm MAXIMUM STRESS OF THE PANEL STRUT H=540 cm | SOLLECITAZIONIMASSIMEPER IL PUNTELLO H=540 cm Panel struts used for plumbing and installation operations. Panel strut H=540 cm: minimum and maximum possible extension. Puntelli di piombatura per il sostegno e la messa in opera. Puntello di sostegno H=540 cm: minima e massima estensione permessa. ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO 19 18 ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 10

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL 90° ANGLE USING UNIVERSAL FORMWORK MODULE (900) AND COMPENSATION ANGOLI A 90° CON CASSERO UNIVERSALE (900) E COMPENSAZIONE 90° ANGLE WITHOUT COMPENSATION (USING ANGULAR FORMWORK ELEMENTS) ANGOLI A 90° SENZA COMPENSAZIONE (USANDO ELEMENTI ANGOLARI) ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 11

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL EXAMPLE OF ACUTE ANGLE | ESEMPIO DI ANGOLO ACUTO EXAMPLE OF ACUTE ANGLE | ESEMPIO DI ANGOLO ACUTO Hinged outside corner Angolo a cerniera esterno Hinged inside corner Hinged inside corner Angolo a cerniera interno Angolo a cerniera interno Hinged outside corner Angolo a cerniera esterno ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 12

FRAMED FORMWORK DESTIL

FRAMED FORMWORK DESTIL

Catalog excerpts

All Farina Formworks ITALY | Formworks | Props | Scaff catalogs and technical brochures