*mydirectindustry

Catalogs
Farina Formworks ITALY | Formworks | Props | Scaff
FRAMED FORMWORK DESTIL MINI

FRAMED FORMWORK DESTIL MINI

1 / 27 PagesView full catalog

FRAMED FORMWORK DESTIL MINI

Product catalog summary

Safety Warnings

Users must comply with local safety regulations in addition to these instructions.
The manual is for TF product users and should be available at the workplace.
This manual does not replace a Method Statement, which is the client's responsibility.
Instructions are specific to the system and do not cover overall safety comprehensively.
Strict adherence to instructions is necessary to prevent accidents and property damage.
Site-specific precautions should be taken, and connections checked periodically.

Features

Modularity: Offers flexibility with various heights and widths.
Material: Made from high resistance steel S315MC with hot dip galvanization.
Weight: Panels weigh approximately 30 kg/sqm, suitable for manual handling.
Pressure: Maximum concrete pressure is 60 kN/m2 up to 3m height, 40 kN/m2 above 3m with stacking.
Plywood: Uses high-quality birch or plastic-coated plywood for durability.
Compatibility: Compatible with other leading formwork systems.
Connection: Quick-acting clamps for fast panel connections.
Technical Assistance: Available pre- and post-sale.
Applications: Suitable for various construction works including vertical, horizontal, and tunnel formworks.

Assembly Instructions

Details on frame elements, connections, and closure solutions.
Instructions for panel struts, corners, stop ends, and lifting.
Guidelines for shifting and storage.

Technical Specifications

Material: Hot-rolled steel S355MC, 2 mm thick.
Admissible load: 60 kN/m2 up to 3m height, 40 kN/m2 above 3m.
Finishing: Hot dip galvanization for protection.
Panel: 15mm thick birch multilayer with phenolic treatment.

Accessories

Includes scaffold brackets and panel struts for stability.
Accessories ensure rapid erection, dismantling, and shifting.

Specifications:
Use of tie rods in PVC tubes (type 22/26) for easy extraction. Admissible load is 90 kN, ultimate load is 190 kN per DIN 18216 standards. Safety factor of 1.6 increases admissible load to 120 kN. Avoid heating or welding rods.

Procedures:
Tie rods connect formwork elements, placed near stiffeners. Destil Mini Quick Acting Clamp ensures alignment and quick connections. Wedge mechanism prevents concrete clogging.

Standards and Recommendations:
Compliance with DIN 18216 standards for load capacities. Use PVC tubes for tie rods and avoid heating or welding.

Formwork System:
Destil Mini Framed Formwork is modular, allowing flexible construction. Includes vertical and horizontal elements, clamps, and universal elements.

Assembly Instructions:
Instructions for assembling angles and connections, including 90°, 150°, and 60° angles. Use of universal elements for columns and circular formworks.

Key Data from Tables and Diagrams:
Tables detail clamp requirements and maximum stress for panel struts. Examples of formwork connections with existing walls and variable wall thicknesses.

Specifications:
Details on components like lifting hooks, transport bolts, clamps, and nuts. Each component is described with its code, weight, and use case.

Procedures:
1. Lifting Hook Placement: Place on perimeter profile near frame stiffenings, max rope angle 60°.
2. Shaft Stripping Corner: Allows panel retraction using a ratchet.
3. Transport and Storage: Guidelines for placing sleepers, strapping elements, and stacking.

Standards and Recommendations:
1. Load Capacities: Lifting hooks load 1000 Kg, transport bolts 500 kg (5 kN).
2. DIN 18216 Compliance: Tie rods and nuts must comply with standards.

Components and Accessories:
Lists formwork components like universal formworks, corners, and clamps. Descriptions include dimensions and weight.

Key Data from Tables:
Tables provide dimensions and weights of formwork components, categorized by height and type.

Specifications and Components:
1. Hexagonal Nut DW15: Available in 50 mm and 70 mm lengths, used for horizontal formwork setups.
2. Pressure Plate: Distributes pressure in formwork systems.
3. Stripping Corner Adapter: Aligns profiles of different thicknesses.

Formwork Systems:
1. Destil Mini Framed Formwork: Load capacity of 1000 kg per hook, requires chain ropes with angles not exceeding 60°.
2. Scaffold Bracket: For constructing platforms, recommended bracket distance 1.8 meters.

Circular Formworks:
1. Destil Mini Circular Formworks: Suitable for circular structures with a minimum inside radius of 180 cm.
2. Anchor Waling: Used with tie-rods for securing circular formworks.

Support Systems:
1. Panel Strut: Allows vertical adjustment up to 4.5 meters.
2. Panel Strut Big Brace: Measures 340 cm.
3. Panel Strut Little Brace: Measures 340 cm.

Contact Information:
The Formwork SRL, Via Achille Grandi, 7 - 20097 San Donato Milanese (Milano) - Italy. Tel: +39 02 5275829, Fax: +39 02 55600291, Email: [email protected], Website: www.theformwork.it

Catalog excerpts

FRAMED FORMWOR K DESTIL MINI CASSERO A TELAIO DESTIL MINI

Open the catalog to page 1

GAMMA DELLE DIMENSIONI 14 AVVERTENZE SULLA SICUREZZA SAFETY WARNINGS • The respect of these instructions does not exempt from compliance with all safety regulations in force in the country where you use the system. • These instructions are intended for users of TF products and systems. Each one must be aware of the contents of this manual; in case they have difficulties in reading the same, the employer has to provide education of the same • Il rispetto delle presenti istruzioni non esime dall'osservanza di tutte le norme sulla sicurezza vigenti nel paese dove si utilizzi il Sistema in oggetto...

Open the catalog to page 2

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI FEATURES DESTIL MINI wall framed formwork is the new TF system which can be handled as handset and without crane, thanks to its reduced panel weight. DESTIL MINI offers TF systems usual efficiency and reduction of total costs, even with a reduced weight, through the following features: MODULARITY: a wall formwork with a wide modularity available in heights of 300 cm, 270 cm, 150 cm, and 120 cm and widths starting from 30cm and up to 90 with a 15cm span between panels. A choice for any necessity. STEEL: high resistance Steel, S315MC Frame...

Open the catalog to page 3

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI IF DESTIL MINI FRAMED FORMWORK CASSERO A TELAIO DESTIL MINI Material: Hot-rolled highly resistance steel S355MC, according to EN 10149 part 1/ part 2 and DIN EN 10051 Admissible load: Up to H 3m 60 kN/m2 Over H 3m 40kN/m2 Finishing: Hot Dip galvanization Panel: birch multilayer panel, 15mm thick ^■Highly resistant steel frame, 92mm high, with perimeter concavity adapted for insertion of connection clamps in any position. "Slotted” perimeteral holes for an higher versatility (i.e.: Formwork modules can be joined with bolts or with Universal...

Open the catalog to page 4

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI DESTIL MINI ELEMENT CONNECTION | COLLEGAMENTO DI ELEMENTI DESTIL MINI DESTIL MINI SCAFFOLD BRACKET | MENSOLA DI GETTO DESTIL MINI To be used for installation of walking platforms or service platforms combined with wooden or steel planks. The scaffold bracket is easily joined to the formwork panels through its fixing head. It is recommended to contain the distance between two scaffold brackets to no more than 1,8 meters. The walking platforms must have timber board at the bottom, the middle and top of the scaffold bracket post. The access...

Open the catalog to page 5

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI IF PLATE NUT D15 (0120/130) | DADO A PIASTRA D15 (0120/130) QUICK ACTING CLAMP | MORSA ACUNEO Connect the adjacent formwork elements together. It can be placed in any point of the frame's perimeter, preferably close to the stiffeners. Destil Mini Quick Acting Clamp and Destil Mini Multi Function Clamp: - align perfectly the elements creating connections faster and resistant to traction - don't have components of small dimensions that may be lost - the wedge mechanism avoids clogging of concrete. Connette i moduli di cassaforma tra loro...

Open the catalog to page 6

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI DESTIL MINI CLOSURE SOLUTIONS | COMPENSAZIONI ELEMENTI DESTIL MINI CLOSURES UP TO 15 cm | COMPENSAZIONE FINO A 15 cm Wall filling, from 0 to 15 cm, using squared timbers or wooden boards, multi function clamp for the connection of the elements and universal waling for alignment. Multi function clamp cod. CC0009DM Compensazioni da 0 a 15 cm con quadrotti o tavole di legno, morsa di compensazione per il collegamento dei moduli e la rotaia di fissaggio per l’allineamento. Tie rod cod. CC00014 Squared timber or boards Tavola o quadrotto in...

Open the catalog to page 7

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI IF DESTIL MINI FRAME FORMWORK ELEMENT Logical modular system in steps of 15cm. The heights and the widths of Destil Mini elements frame create a modular system logical and simple to use making the formwork particularly flexible and cost effective. - easy planning and forming - adjustment of the height and width in steps of 15 cm - few compensations required - clear positioning of junctions - 5 element widths - 4 element heights With this wide range you can form any geometry. ELEMENTI CASSERO A TELAIO DESTIL MINI Sistema modulare logico...

Open the catalog to page 8

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI IF PANEL STRUTS L=340 cm | PUNTELLO DI PIOMBATURA L=340 cm MAXIMUM STRESS OF THE PANEL STRUT L=340 cm | SOLLECITAZIONIMASSIMEPER IL PUNTELLO L=340 cm Panel struts used for plumbing and installation operations. Panel Strut L=340 cm: minimum and maximum possible extension. Puntelli di piombatura per il sostegno e la messa in opera. Puntello di Sostegno L=340 cm: minima e massima estensione permessa. ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO 17 16 ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 9

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI IF 90° ANGLE WITH DESTIL MINI UNIVERSAL ELEMENT 90° ANGLE WITH DESTIL MINI INT. & EXT. CORNERS ANGOLI A 90° CON ELEMENTO UNIVERSALE DESTIL MINI ANGOLI A 90° CON ANGOLI DESTIL MINI INT. & EST. 18 ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO 19

Open the catalog to page 10

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI ACUTE ANGLE WITH DESTIL MINI HINGED CORNERS | ANGOLO ACUTO CON ANGOLI A CERNIERA DESTIL MINI EXAMPLE OF ACUTE ANGLE | ESEMPIO DI ANGOLO ACUTO Hinged outside corner Angolo a cerniera esterno Hinged inside corner Hinged inside corner Angolo a cerniera interno Angolo a cerniera interno Hinged outside corner Angolo a cerniera esterno ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO ASSEMBLING INSTRUCTIONS | ISTRUZIONI DI MONTAGGIO

Open the catalog to page 11

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI EXAMPLE OF 60° ANGLE | ESEMPIO DI ANGOLO A 60° Hinged outside corner Hinged outside corner Angolo a cerniera esterno Angolo a cerniera esterno Hinged inside corner Angolo a cerniera interno Dado esagonale 150° angle made using Destil Mini hinged inside and outside corners Pressure plate Piastra ripartizione fondazione Angolo a 150° con angoli a cerniera Destil Mini interni ed esterni Hinged inside corner Angolo a cerniera interno Hinged inside corner Angolo a cerniera interno Hinged inside corner Angolo a cerniera interno Hinged outside...

Open the catalog to page 12

FRAMED FORMWORK DESTIL MINI

FRAMED FORMWORK DESTIL MINI

Catalog excerpts

All Farina Formworks ITALY | Formworks | Props | Scaff catalogs and technical brochures