*mydirectindustry

Catalogs
Farina Formworks ITALY | Formworks | Props | Scaff
DESTIL SINGLE SIDE SHUTTERING

DESTIL SINGLE SIDE SHUTTERING

Product catalog summary

Overview

This document presents the Destil Formwork System designed for single-faced concreting, primarily used for earth-retaining walls and single-sided concrete casting. It covers system components, supporting frames, anchorage mechanisms, accessories, assembly procedures, and best practices.

1. System Description

The Destil system employs trapezoidal steel frames (Types A, B, C, D) that can be vertically stacked and connected with steel pins to reach casting heights up to 9 meters. Two parallel frames are braced with horizontal and diagonal scaffolding tubes (48 mm diameter) using swivel couplers. Adjustable front and back feet enable precise vertical alignment and plumbing.

2. Supporting Construction Frames

Type A: 227 cm height, 408 cm length, 415 Kg
Type B: 189 cm height, 306 cm length, 335 Kg
Type C: 286.5 cm height, 222 cm length, 315 Kg
Type D: 126.5 cm height, 91.5 cm length, 44 Kg (supplementary)

Frames connect vertically via D50 pins (180 mm and 350 mm lengths) secured with safety hair pins.

3. Anchorage System

The anchorage secures the formwork to the foundation and includes:

Pigtail Tie Rods (D15, D20, D26): Embedded in the foundation before casting.
She-bolts (D15, D20): Screwed onto pigtail rods and fixed to anchor walings.
Anchor Walings: Horizontal steel members connected to frames and anchored via she-bolts.

4. Accessories

Adjustable Front Foot (D60) and Back Foot (D75): Height adjustment from 60 to 260 mm for leveling.
Big Adjustable Wrench: For fine adjustment of feet.
Access Brackets (Types A and B): Create safe walking platforms with foot protection boards and parapet scaffolding tubes.
Lifting Hooks: Facilitate safe handling and movement of frames.
Fixing Pins (D50): Connect frames vertically and horizontally, secured with safety hair pins.

5. Assembly and Usage

Assembly involves stacking trapezoidal frames connected by pins and braced with scaffolding tubes. Adjustable feet ensure vertical alignment. Anchorage components are installed prior to casting, embedding pigtail tie rods in the foundation and securing anchor walings with she-bolts. Access brackets provide safe working platforms with fall protection.

6. Applications and Examples

The system is suited for earth-retaining walls and complex structures like arched roofs or slabs. Different frame types and configurations allow adaptation to required casting heights and structural needs.

7. Technical Data Summary

Component	Code	Weight (Kg)	Dimensions (cm)	Function
Supporting Frame Type A	GCT001	415	H: 227, L: 408	Main structural frame
Supporting Frame Type B	GCT002	335	H: 189, L: 306	Main structural frame
Supporting Frame Type C	GCT003	315	H: 286.5, L: 222	Main structural frame
Supporting Frame Type D	GCT004	44	H: 126.5, L: 91.5	Supplementary frame
Front Foot D60	GCT005	12.5	Adjustable 60-260 mm	Height adjustment
Back Foot D75	GCT006	18	Adjustable 60-260 mm	Height adjustment
Fixing Pin D50 L=180 mm	GCT011	3.0	-	Frame connection
Fixing Pin D50 L=350 mm	GCT012	5.5	-	Frame connection
She-bolt D15-D20	GCT013-GCT014	1.5-2.6	-	Anchorage system
Pigtail Tie Rod D15-D20-D26	GCT019-GCT021	1.0-3.0	-	Anchorage system

8. Anchorage System Components and Specifications

Anchor Waling (CGT007, 35 Kg): Positioned on triangular bases of frames A, B, C; fixed with universal fixing bolts (L=400 mm).
Universal Fixing Bolts: Lengths 250 mm (GCT016, 2 Kg) and 400 mm (GCT017, 2.3 Kg); connect walings to frames and tie anchor walings.
Hexagonal Nut D26 (CGT024, 0.75 Kg) and Plate (CGT025, 2.8 Kg): Secure tie rods and she-bolts to anchor walings.
Super Plate Nut D15-D20 (CC0001, GCT020): Used with she-bolts or anchor bars on anchor walings.
Rod Connector D26 (GCT015, 1.4 Kg): Connects tie rods with pigtail tie rods.
Formwork Fixing Waling (GCT010, 4.4 Kg): Fixed against vertical frames using universal fixing bolts; suitable for vertical and horizontal formwork.
Pressure Plate (GCT022, 1 Kg): Alternative to fixing waling when vertical frames align with Omega profile holes.

9. Anchorage and Fixing Accessories

Pigtail tie rods and she-bolts are embedded in concrete for permanent anchorage.
Super plate nuts and articulated plate nuts secure bars and she-bolts on anchor walings.
Clamps (250 mm and 400 mm) fix walings and formwork rails to trapezoidal frames.

10. Connection Details

Formwork fixing walings attach to vertical frames via universal fixing bolts and clamps.
Pressure plates are used when vertical frames align with Omega profile holes.
Connections support both vertical and horizontal formwork orientations.
Key components include Destil formwork elements, fixing walings, rails, pressure plates, plates for clamps, universal fixing bolts, and clamps.

11. Casting Sections and Supporting Frame Types

Casting heights range from 350 cm to 990 cm.
Supporting frames A, B, C, and D are selected based on casting height requirements.
Each casting height example pairs a specific supporting frame with a trapezoid type to ensure structural adequacy.

12. Critical Parameters and Best Practices

Anchorage bars (ondulated bars) must be permanently embedded in concrete.
Spacing of anchorage bars depends on jet pressure and concrete pour height.
Universal fixing bolts and clamps must be properly sized and positioned for secure fixing.
Connections must accommodate vertical and horizontal formwork orientations for site flexibility.
Correct matching of supporting frame types and trapezoids to casting height is essential for stability.

13. Best Practices and Recommendations

Use adjustable feet and big wrench to ensure precise vertical alignment.
Secure all frame connections with fixing pins and safety hair pins to prevent accidental disassembly.
Install pigtail tie rods correctly before casting to guarantee anchorage stability.
Employ access brackets and parapet scaffolding tubes for safe working platforms and fall protection.
Follow manufacturer guidelines for stacking frames to safely achieve desired casting heights.

Conclusion

The Destil single-faced concreting system provides a modular, adjustable, and secure solution for single-sided concrete casting against earth. Its components facilitate ease of assembly, adaptability up to 9 meters in height, and safe working conditions with integrated access platforms and anchorage systems, ensuring structural integrity and installation efficiency.

Catalog excerpts

SINGLE-FACED CONCRETING GETTI CONTRO TERRA

Open the catalog to page 1

13 Big adjustable wrench 14 Access bracket type A 14 Access bracket type B 18 Front lifting hook 18 Back lifting hook 22 Universal fixing bolt for waling L=250 mm 22 Universal fixing bolt for waling L=400 mm 24 Formwork fixing waling 04.1 TELAI A TRAPEZIO 7 Trapezio A per GCT 04.2 ACCESSORI 12 Piede anteriore D60 13 Ehiave regolazione piedi Mensola di servizio A Mensola di servizio B Spina Di collegamento D50 L=180 mm Spina di collegamento D50 L=350 mm Staffa di sollevamento anteriore Staffa Di sollevamento posteriore Barra con manicotto D15-D20 Barra ancorante...

Open the catalog to page 2

Single-faced concreting GETTI CONTRO TERRA Example of traditional use of single-faced concreting. Utilizzo tradizionale dei trapezi per getti contro terra.. Destil formworks Cassero Destil Earth Terreno Supporting construction frames Trapezi GCT Wall Muro gettato single-faced concreting - GETTI CONTRO TERRA

Open the catalog to page 3

Single-faced concreting GETTI CONTRO TERRA Example of particular single-faced concreting’ s use to support an arched roof casting. Utilizzo particolare dei trapezi per getti contro terra come struttura di sostegno al getto di una volta o di un solaio. Wooden beams Travi in legno Shoring system Sistema di puntellazione Arched roof Getto della volta Secondary bearing system Orditura secondaria Supporting construction frame, type B Trapezio B Supporting construction frame, type C Trapezio C Wooden beams and curved bearing beams Travi in legno e centine Main bearing system Orditura primaria Secondary...

Open the catalog to page 4

SUPPORTING COnSTRUCTION FRAME TELAI A TRAPEZIO

Open the catalog to page 6

Single-faced concreting GETTI CONTRO TERRA complete single-faced concreting Destil single-faced concreting are used to realize single-sided walls. Different steel frames can be put one on the other and connected with steel pins to reach requested casting height. Typical structure is composed out of two parallel frames which are braced and fixed together with horizontal and oblique scaffolding tubes (F48) and swivel couplers. Front and back foot, both adaptable in height with Adjustable wrench, allow to make perfect plumbing and adjust the structure when necessary. The anchorage system is very...

Open the catalog to page 7

Supporting construction frame Single-faced concreting GETTI CONTRO TERRA TELAI A TRAPEZIO supporting coNstruction frame, type a code: GCT001 | weight: 415 Kg Dimensions: height: 227 cm length: 408 cm trapezio a per gct codice: GCT001 | peso: 415 Kg Dimensioni: altezza: 227 cm base: 408 cm supporting coNstruction frame, type b code: GCT002 | weight: 335 Kg Dimensions: height: 189 cm length: 306 cm trapezio b per gct codice: GCT002 | peso: 335 Kg Dimensioni: altezza: 189 cm base: 306 cm single-faced concreting - GETTI CONTRO TERRA

Open the catalog to page 8

code: GCT003 | weight: 315 Kg Dimensions: height: 286,5 cm length: 222 cm codice: GCT003 | peso: 315 Kg Dimensioni: altezza: 286,5 cm base: 222 cm code: GCT004 | weight: 44 Kg Dimensions: height: 126,5 cm length: 91,5 cm codice: GCT004 | peso: 44 Kg Dimensioni: altezza: 126,5 cm base: 91,5 cm 8 SINGLE-FACED CONCRETING - GETTI CONTRO TERRA

Open the catalog to page 9

Supporting construction frame Single-faced concreting GETTI CONTRO TERRA TELAI A TRAPEZIO positioning of brace scaffolding tubes (ø 48) | posizionamento dei tubi di collegamento e controvento (ø 48) Supporting construction frame, type D Trapezio D Supporting construction frame, type C Trapezio C Supporting construction frame, type B Trapezio B Swivel coupler Coppie orientabili di giunti portatubo Supporting construction frame, type A Trapezio A Brace scaffolding tube (ø 48) Tubo di collegamento e controvento (ø 48) single-faced concreting - GETTI CONTRO TERRA

Open the catalog to page 10

ACCESSORIES ACCESSORI

Open the catalog to page 12

Single-faced concreting front foot d60 code: GCT005 | weight: 12,5 Kg It is put in an appropriate foot box and connected at the bottom of the supporting construction frame. It allows compensations from 60 to 260 mm. piede anteriore d60 codice: GCT005 | peso: 12,5 Kg Viene posizionato nell’apposita sede e fissato al fondo del trapezio. La sua regolazione varia da un minimo di 60 mm ad un massimo di 260 mm. back foot d75 code: GCT006 | weight: 18 Kg It is put in an appropriate foot box and connected at the bottom of the supporting construction frame. It allows compensations from 60 to 260 mm. piede...

Open the catalog to page 13

Single-faced concreting ACCESSORIES GETTI CONTRO TERRA ACCESSORI detail: front and back foot | particolare: piede anteriore e posteriore Connecting holes Fori di fissaggio Front foot Piede anteriore Adjusting and fixing nut Dado di regolazione Back foot Piede posteriore BIG ADJUSTABLE WRENCH code: GCT016 | weight: 0,8 Kg Used for final plumbing of the entire single-faced concreting due to millimetric regulation of front and back feet. CHIAVE REGOLAZIONE PIEDI codice: GCT016 | peso: 0,8 Kg La chiave di regolazione è utilizzata per la piombatura finale dei trapezi GCT grazie alla regolazione millimetrica...

Open the catalog to page 14

Single-faced concreting GETTI CONTRO TERRA access bracket type A code: GCT008 | weight: 12,5 Kg It is placed and subsequently connected to the upper frame of Supporting construction frames, type A, B or C, with fixing pins. Used to realize walking platform and it is predisposed for foot protection board 5cm thick. It’s completed with parapet screw-on couplers, fixed on the vertical frame. Parapet screw-on coupler Giunto portatubo di parapetto mensola di servizio A codice: GCT008 | peso: 12,5 Kg Viene spinata al tubo orizzontale superiore del trapezio A, B oppure C. Può sopportare un piano di...

Open the catalog to page 15

Single-faced concreting ACCESSORIES GETTI CONTRO TERRA ACCESSORI connection of access bracket, type A | attacco tipico di una mensola di servizio Parapet scaffolding tube 1 Tubi F48 di parapetto 1 Foot protection board 2 Tavola fermapiede 2 Access bracket, type A 3 Mensola di servizio 3 Walking platform 4 Piano di camminamento 4 2 Access bracket, type A, is connected on the top of the supporting construction frames (type A, B and C) 5 Fissaggio della mensola di servizio in sommità ai trapezi A, B o C 5 connection of access bracket, type B | attacco tipico di una mensola INTERMEDIA Parapet scaffolding...

Open the catalog to page 16