*mydirectindustry

Catalogs
Farina Formworks ITALY | Formworks | Props | Scaff
DESTIL MINI - LIGHT FORMWORK 6OKN

DESTIL MINI - LIGHT FORMWORK 6OKN

1 / 48 PagesView full catalog

DESTIL MINI - LIGHT FORMWORK 6OKN

Product catalog summary

Safety Warnings

Users must comply with local safety regulations in addition to the manual's instructions.
The manual is for TF product users and should be accessible at the workplace.
It does not replace a Method Statement, which is the client's responsibility.
Instructions are specific to the system and not exhaustive for overall safety; local health and safety regulations should be consulted.
Strict adherence to instructions is necessary to prevent accidents and property damage.
Site climatic conditions should be considered, and connections checked periodically, especially after severe weather.

Features

Modularity: Available in various sizes for flexible construction.
Material: Made from highly resistant steel (S315M type C) with hot dip galvanization.
Weight: Panels weigh approximately 30 kg/sqm, allowing manual handling.
Pressure Capacity: Supports up to 60 kN/m2 for heights up to 3m, and 40 kN/m2 for greater heights.
Plywood: High-quality birch plywood, with options for plastic-coated versions.
Compatibility: Compatible with other leading formwork systems.
Durability: Hot dip galvanized frames ensure longevity.
Connection: Quick-acting clamps for easy panel connections.
Technical Assistance: TF provides technical support before and after sales.
Applications: Suitable for various construction works including vertical and horizontal works, climbing formworks, dam formworks, elevator shafts, and tunnels.

Technical Specifications

Material: Hot-rolled steel S355MC, 2mm thick with hot zinc-coat finishing.
Load Capacity: Up to 60 kN/m2 for heights up to 3m.
Panel: 15mm thick birch multilayer panel with phenolic treatment.
Frame: 92mm high steel frame with perimeter slots for accessory attachment.

Assembly Instructions

Ensure secure connections using provided clamps and accessories.
Install scaffold brackets with appropriate spacing and safety measures.
Anchor panel struts to prevent turnover.

Accessories

Includes scaffold brackets, panel struts, and various clamps for secure assembly.
Facilitates rapid erection, dismantling, and shifting of formwork on-site.

Specifications
The document details the Destil Mini Framed Formwork system specifications, including components like tie rods and clamps. Tie rods have an admissible load of 90 kN and an ultimate load of 190 kN. Clamps have a tensile force of 10.0 kN and a shear force of 5.0 kN.

Procedures
Assembly instructions for the Destil Mini Framed Formwork include guidelines for fixing formwork during casting, using accessories like plate nuts and hexagon nuts. Lifting hooks should not exceed a 60° angle with ropes.

Standards and Recommendations
Components must adhere to DIN 18216 standards. Heating or welding bars is discouraged to prevent deformation. Plastic tubes are recommended for tie rods to facilitate reuse.

Key Data from Tables and Diagrams
Tables specify the number of clamps required for different element sizes. Diagrams illustrate assembly of acute and 90° angles using hinged corners.

Critical Information
Emphasizes the importance of correct accessories for formwork assembly and precise alignment for structural integrity. Highlights the system's modular nature for flexible and cost-effective solutions.

Assembling Instructions
1. Place support woods (80x100) under the transverse profile.
2. Tie the wood to the last frame element with tape.
3. Stack a maximum of 10 elements.
4. Tie the stack with strapping.

Transport and Storage
Transport pins have a maximum capacity of 500 kg (5 kN) and are used with four chain ropes for transporting items.

Items List
Lists formwork components with codes, descriptions, and weights, including universal formworks, corners, and accessories like clamps, nuts, and tie rods.

DM Accessories
Includes quick acting clamps, multi-function clamps, super plate nuts, and tie rods for connecting formwork modules and locking bindings. Specifies admissible loads and usage instructions.

Universal Waling and Fixing Devices
Used in compensation areas and for rigidifying overlapped formworks, fixed with universal fixing bolts. Anchor brackets and fixing devices secure formwork modules.

Additional Accessories
Includes lifting hooks, scaffold brackets, and panel struts for module lifting and vertical adjustment. Each accessory has specific usage instructions and load capacities.

Catalog excerpts

FRAMED FORMWORK DESTIL MINI CASSERO A TELAIO DESTIL MINI

Open the catalog to page 1

AVVERTENZE SULLA SICUREZZA SAFETY WARNINGS • The respect of these instructions does not exempt from compliance with all safety regulations in force in the country where you use the system. • These instructions are intended for users of TF products and systems. Each one must be aware of the contents of this manual; in case they have difficulties in reading the same, the employer has to provide education of the same • The User’s Manual instructions must always be available at the workplace for all operators • This manual, even if used in order to draw up a Method Statement, will not substitute...

Open the catalog to page 2

ASSEMBLING INSTRUCTIONS 16 PANEL STRUTS 16 GAMMA DELLE DIMENSIONI 14 ANGOLI DI DISARMO RAPIDO 30

Open the catalog to page 3

DESTIL FRAMED FORMWORK | CASSERO A TELAIO DESTIL FEATURES Destil Mini wall framed formwork is the new TF system which can be handled as handset and without crane, thanks to its reduced panel weight. DEStIL Mini offers TF systems usual efficiency and reduction of total costs, even with a reduced weight, through the following features: MODULARITY: a wall formwork with a wide modularity available in heights of 300 cm, 270 cm, 150 cm, and 120 cm and widths starting from 30cm and up to 90 with a 15cm span between panels. A choice for any necessity. STEEL: highly resisting Steel, S315M type C . Frame...

Open the catalog to page 5

CASSERO A TELAI O D ESTI L MIN I Material: hot-rolled highly resisting steel S355MC, according to EN 10149 part 1/ part 2 and DIN EN 10051 Admissible load: Up to H 3m 60 kN/m2 Over H 3m 40 kN/m2 Finishing: Hot Dip galvanization Panel: birch multilayer panel, 15mm thick Materiale: Acciaio laminato a caldo ad alta resistenza S355MC, a grana fine, secondo EN 10149 parte1/parte2 e DIN EN 10051. Portata ammissibile: sino ad H 3m 60 kN/m2 oltre H 3m 40 kN/m2. Finitura: zincatura a caldo Pannello: multistrato di betulla spessore 15mm 1 Highly resistant steel frame, 92mm high, with perimeter concavity...

Open the catalog to page 6

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI - lightness - modularity - high compatibility with other formwork systems currently on the market - accessories gamme completeness - rapid formwork erection, dismantling and shifting on-site - respect of measure tolerances and great care in producing every system component - wide range of steel frame elements - pre-and post-selling assistance - attention and respect of safety factors - leggerezza - modularità - alta compatibilità con sistemi di casseratura di altri leader di mercato - completezza e intercambiabilità degli accessori -...

Open the catalog to page 7

DESTIL MINI ELEMENT CONNECTION | COLLEGAMENTO DI ELEMENTI DESTIL MINI Scaffold Bracket cod. CC0022DM mensola di getto cod. CC0022DM Panel strut H=340 cod. CC0025DM Puntello di sostegno H=340 cod. CC0025DM Super plate nut cod. CC0045 Dado a piastra articolata cod. CC0045 Quick acting clamp cod. CC0008DM Morsa a cuneo cod. CC0008DM

Open the catalog to page 8

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI DESTIL MINI SCAFFOLD BRACKET | MENSOLA DI GETTO DESTIL MINI To be used for installation of walking platforms or service platforms combined with wooden or steel planks. The scaffold bracket is easily joined to the formwork panels through its fixing head. It is recommended to contain the distance between two scaffold brackets to no more than 1,8 meters. The walking platforms must have timber board at the bottom, the middle and top of the scaffold bracket post. The access to the walking platforms have to be guaranteed by suitable ladders....

Open the catalog to page 9

PLATE NUT D15 (0150) | DADO A PIASTRA D15 (0150) Screwed on the tie rods in order to lock up bindings (2 plates needed for each bar). Admissible load =90 kN (according to regulation DIN 18216). Si avvita sulle barre di ancoraggio D15 per serrare le legature (n° 2 piastre per ogni barra). Portata ammessa a norma DIN 18216=90 kN. QUICK ACTING CLAMP | MORSA ACUNEO Connect the adjacent formwork elements together. It can be placed in any point of the frame's perimeter, preferably close to the stiffeners. Destil Mini Quick Acting Clamp and Destil Mini Multi Function Clamp: - align perfectly the elements...

Open the catalog to page 10

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI TIE ROD | BARRA DI ANCORAGGIO Used to fix corresponding formwork during the casting operations. Produced in standard length of 6 meters and cut to necessary length on the construction site. The bars can be reused after the works; but prior to casting, they should be put in plastic tube, type 22/26, and then can be reused. For correct usage the bar should be equipped with appropriate accessories (Super plate nuts or Hexagon nuts or Plate nuts D15). Admissible load: 90 kN (according to regulation DIN 18216) Ultimate load: 190 kN (according...

Open the catalog to page 11

DESTIL MINI CLOSURE SOLUTIONS | COMPENSAZIONI ELEMENTI DESTIL MINI Multi function clamp cod. CC0009DM Morsa di compensazione cod. CC0009DM Super plate nut cod. CC0045 Dado a piastra articolata cod. CC0045 Universal waling cod. CC0011DM cod. CC0012DM Rotaia di fissaggio cod. CC0011DM cod. CC0012DM Universal fixing bolt for waling cod. CC0016DM Morsetti bloccaggio rotaia cod. CC0016DM

Open the catalog to page 12

DESTIL MINI FRAMED FORMWORK | CASSERO A TELAIO DESTIL MINI CLOSURES UP TO 15 cm | COMPENSAZIONE FINO A 15 cm Wall compensation, from 0 to 15 cm, using wooden beam or wooden boards, multi function clamp for the connection of the elements and universal waling for alignment. Compensazioni da 0 a 15 cm con quadrotti o tavole di legno, morsa di compensazione per il collegamento dei moduli e la rotaia di fissaggio per l’allineamento. Wooden beam or boards Tavola o quadrotto in legno Universal waling Rotaia di fissaggio Multi function clamp Morsa di compensazione CLOSURES UP TO 50 cm | COMPENSAZIONE...

Open the catalog to page 13

DESTIL MINI FRAME FORMWORK ELEMENT Logical modular system in steps of 15cm. The heights and the widths of the frame Destil Mini elements form a modular system logical and simple to use that makes the formwork particularly flexible and cost effective. - easy planning and forming - adjustment of the height and width in steps of 15 cm - few compensations required - clear positioning of junctions. - 5 element widths, - 4 element widths With this wide range you can form any geometry. ELEMENTI CASSERO A TELAIO DESTIL MINI Sistema modulare logico in passi di 15 cm. Le altezze e le lar-ghezze degli elementi...

Open the catalog to page 14

DESTIL MINI - LIGHT FORMWORK 6OKN

DESTIL MINI - LIGHT FORMWORK 6OKN

Catalog excerpts

All Farina Formworks ITALY | Formworks | Props | Scaff catalogs and technical brochures