Ajustable PROPS

Product catalog summary

Specifications:
The document provides a table of admissible loads in kilonewtons (kN) according to the UNI-EN 1065 standard. The conversion used is 1 kN equals 102 kg. The loading capacities are calculated by dividing the collapse load by 1.65, as specified by the EN standard.

Components:

120x120x3.5 mm
ø 48x1.8 mm
ø 60x3.5 mm
ø 11 mm
Ring 2.5 mm
ø 40 x 2 mm

Product Description:
The document describes a prop with a length of 3.20 meters, categorized as a light type.

Loading Capacities:
The table lists the loading capacities for different extensions of the prop, ranging from 3.20 meters to 1.80 meters. The loading capacity increases as the extension decreases, with a maximum capacity of 17.00 kN for extensions from 2.60 meters to 1.80 meters.

Catalog excerpts

TABELLA DEI CARICHI AMMISSIBILI IN kN SECONDO NORMATIVA UNI-EN 1065 (1 kN=102 Kg) • Chart of admited load in kN following the norm UNI-EN 1065 (1 kN=102 kg) • Tableau des charges admissibles Apertura (mt) Extension (mt) aperture (mt) Portata (kN) loading capacity (kN) Charge admissible (kN) PUNTELLO 3,20 MT. TIPO LEggERO ProP 3,20 mT. lIghT TyPE ETaIs 3,20 mT. modEl lEgEr Le portate in tabella sono ottenute dividendo il valore del carico di collasso per 1,65 (secondo normativa EN) • The loading capacities are obtained dividing the collapse load/1,65 (fixed number given by EN) • Charges dans le...

Open the catalog to page 8

All Farina Formworks ITALY | Formworks | Props | Scaff catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list