PS3 Series
1Pages

Preset Counter, Timer Voltage Supply Display Backlight Output Power Memory Input Count Speed Timing Mode Scaling Preset Control Output Keyboard Disable Programming Housing Mounting Connection Environmental Temperature PS3-22 Preset counter w/ 2 presets 94-240V AC 10% 50/60Hz VA rating 3VA or 1224VDC 10 @ 100mA (max) 2 Lines of 6 digit supertwist LCD with yellow/green LED backlight . Line 1: 0.28” (7 mm) indicates count/time, line 2: 0.16” (4 mm) indicates preset, programmable decimal point up to 3 places Programmable To Always ON, Always OFF or AUTO (ON for 30s following last key press) +12Vdc ±10% @100mA, for powering sensors, encoder, etc.(AC powered only) 40 year data retention with no battery 1) High speed: PNP/ NPN High speed: PNP/ NPN Opto-isolated 10-30VDC Opto-isolated 10-30VDC, 2) Low speed: OptoQuadrature & uni-direction isolated 12-260V AC/DC 1) High speed 10 kHz max 2) Low speed 30 Hz max 0.01 seconds, seconds, minutes, hours & 100ths and hours & minutes 1) Front push button 2) Remote Opto-isolated 12-260V AC/DC 3) Automatic, User selectable reset to 0 (add) or to preset (sub). Multiply 0.00001 - 9.99999, default 1.00000 Divide 1 - 99999, default 00001 Single front keypad programmable 6 digit preset, count up (add) with output at preset or count down (sub) with output at zero. Unit may have to be reset for a new preset to take effect. Relay (N.O. or N.C.) self latching, contacts rated at 2A @ 30VDC, 0.5A @ 240VAC resistive load. In the manual reset mode (loop off), the output will remain latched until reset. In the auto-reset (loop on) mode the output will remain "on" for a user selectable time delay (0.01 to 99.99 sec). Rear contact closure to disable front keypad Keypad for all functions Black Plastic Panel Mount Screw Terminals Front panel IP 65 (NEMA 4) Operating: +14 to +122 °F / -10 to + 50 °C 14 to +140F / -20 to +60 °C PS3-11 & PS3-21 have prescaling of input PS3-12 Preset Counter / Timer Accepts a wide range of industrial inputs Model Function LCD display indicates both count and preset AC/DC and self powered versions APPLICATIONS: Batch counting and control, coil winding and wire cutting, length measurement, packing-line control, stop/start control and numerical position control. Up down counter/timer control DESCRIPTION: The PS3 Series of 6 digit preset counters/timers offers operation on a wide supply range of AC/DC voltages. This Series also accepts a wide range of inputs including AC/DC and contact closure. Each unit has a preset constantly shown below the main display. The preset can be latched until reset or auto-cycled in a count up to the preset or a count down to zero function. These features, easy setup and programming make it a simple solution for many applications. Dimensions: (not to scale)