PRT

PRT

Product catalog summary
Overview
This document provides technical specifications and characteristics of the PRT Striker, a single effect solenoid that is spring-operated and activated by a low-power polarized electrical signal in case of a fault. The striker must be manually reset to its starting position.
Specifications
  • Nominal Voltage (Un): 3 Vdc
  • Spring Strength Travel: 15 mm
  • Spring Strength Start of Travel (Fe): 36 N
  • Spring Strength End of Travel (Fru): 39 N
  • Insulation Class: Y
  • Duty Cycle at Un (ED): 80%
  • Resistance at 20ºC: 1.1 Ohm
  • Protection Rating: IP00
Dimensions
The dimensions for the PRT-15 model are specified, with a nominal voltage of 3 Vdc and a spring strength travel of 15 mm.
Additional Models
  • PRT-15/3B: Minimum trip voltage of 1.4 V, release minimum energy of 18 mJ
  • PRT-15/3C: Minimum trip voltage of 1.3 V, release minimum energy of 16 mJ
  • PRT-15/3A: Minimum trip voltage of 1.2 V, release minimum energy of 13 mJ
Tolerance on Forces: ±10%
Contact Information
For further inquiries, contact via Tel. +34 94 471 14 09, Fax +34 94 471 05 92, or E-mail: [email protected]. More information can be found at www.fanox.com.
See more

Catalog excerpts

PRT-1

PRTStriker • This is a single effect solenoid. The striker is spring operated. • The striker is activated by low-power polarised electrical signal supplied by the relay in case of a fault. • The striker is reset to its starting position manually.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.