Pneumatic and Servo Presses Ready to Run Customizing Our Specialty

BP-500 Adjustable Column Press from 400 to 725 lbs. An economical press with a small footprint for light assembly work Features: • Solid steel column with 11” of height adjustment; longer columns available • 8” x 6” base with keyway for easy tool mounting • 3.25” polished bore, double-acting cylinder standard, 725 lbs at 100 psi • 3” stroke standard • Minimum cycle time 2 seconds • Two-hand OSHA approved controls, filter regulator and speed control • Optional bore cylinders and stroke lengths; see table • Male threaded rod %-16 x 1” • Measures 16” x 10” x 23” • Weighs 47 lbs • Made in the USA •...

Programmable servopress for precision control of force, stroke, speed, dwell, and more Features: • Positioning accuracy of ±.0004” (.01mm) • Control force to a tolerance of ±10% of target point • Easy programing with software included. Teaching pendant is optional. • 4” stroke standard; optional strokes available from 2” to 12” • Store up to 15 programs • Adjustable column allows for 11 inches of height adjustment Non rotating ram Closed loop servomotor and servo amplifier Small footprint and adjustable column with 11” of height adjustment • 8”x6” base with keyway and two bolts for easy tool...

Model 5000L ‘C’ Frame Presses from 1 to 5 tons Features: • 16”W x 13 %” D bed area with ram 7.125” from front of die plate; optional wide model with 22” wide bed area • Ram to bolster plate clearance is 8 %” • Rigid ‘C’ frame construction with 1” thick side walls to prevent flexing • Tough nitro blue enamel finish and hardcoat aluminum die plate with three sets of tapped %-13 holes for die mounting • 5” bore, double-acting cylinder with cushioned stops produces about one ton at 100psi • 4” stroke standard with 4.5” shut height. Optional stroke lengths available • Centrally located ram with 1.5”...

Four and Five Ton ‘C’ Frame Presses Same specifications as standard 5000L with all available options 5000L-8 produces four tons at 100 psi; 5000L-10 produces five tons at 100psi Economy ‘C’ Frame Press to 2 tons Same specifications and available options as 5000L less sheet metal shroud around the cylinder, base plate, counter & front-mounted pressure gauge. 5000LE produces about 1900# at 100 psi; 5000LE-6 produces about 5600# at 100psi; Model 5000L ‘ ‘C’’ Frame Presses fro

Janome ElectroPress For Critical Assembly Applications with Force Range from 5kgf to 8000kgf Features: • Program force, speed, distance, stop position, stop load and dwell time with built-in software • Optional JP Soft software includes JP Designer for data teaching and OK/NG judgment setting on a PC, and JP Reporter to record data for CPK analysis and traceability of all parameters into Excel, csv and HTML including graphing • Repeatable accuracy of ±.005mm • Store up to 100 programs in flash memory; use PC for unlimited pattern storage • Holding time to 999.9 seconds in 0.1sec increments •...

Clean Room Stand-Alone JP Series 4 Head Style JP Series 4 Unit Style

New, Lange C Frame “Smart Press” Features: • Two models with force range of 2200 lbs (5000L-JP-S1001) and 4400 lbs (5000L-JP-S2001) • Repeatability of ±.01 mm • Bed working area 13 %”D x 16”Wwith ram 10” from die plate • Strokes available: SI001 with 100, 250mm; S2001 with 100, 200, or 350mm • Built-in load cell; specify push or pull • I/O with 17 inputs and 16 outputs • Two hand non-contact optical controls • Teaching software for use with PC; optional teach pendant • Controller supplied works with PLC, not included • Power: 180-250V, single phase Customize or Design and Build a New Press Features:...