Fancort Solutions Board Handling Electronic Assembly Production Assembly

In electronic assembly, Fancort helps you do it faster! better! ...and more economically! n this fast-paced world of electronics, short product cycles remain a constant fact of life, and change remains a continuous challenge. As new or improved products evolve, new assembly techniques and equipment are called for. Responding to this need has defined Fancort Industries' role as a preferred supplier to PCB assemblers worldwide. Since our founding in 1972, Fancort value-priced racks, fixtures and production accessories have appeared in plants worldwide accommodating processed boards securely and...

Economical racks with ESD protection that require no adjustment for handling clinched, soldered or bare boards of almost any size. These universal racks are each slightly different in size, slot shape and design and some are available in a choice of materials to meet a wide variety of handling applications. Standard Rack-Alls are molded in tough, reinforced, conductive material that meets Mil Spec #B-81705-B for static discharge. Model RA-2Q and RA-24 Rack-All RA-18 Rack-All PCB Handling Products • Our largest universal rack available in two sizes • 20 slots with easy to load angle, measures...

Adjustable Racks Fancort Karry-Alls are adjustable racks that hold boards securely on two opposite sides for maximum protection during transport and storage, either horizontally or vertically. Three different models of Karry-Alls are featured, each with a different injection molded card guide to handle small, medium, large, very large and hard-to-hold boards. All the card guides are molded in tough, reinforced conductive material that meets Mil Spec #B-81705-B for static discharge. The standard Karry-Alls can tolerate solvents and temperatures to 185°F. They are very easy to set up with rigid...

Adjustable Racks Model 79 - For Medium Boards and Boards with Hard to Hold Edges • 18 unique double slots measure .125” W x .125” D inside a .600” W x .200” D slot for boards with components on the edge • Standard card guides are 5.5” deep; optional 11” deep guides • Model 79-20B-5 or 79-20B-11 fits standard 17” x 21” tote box • Optional carrying handle, P/N KAH-2 • Optional leg brackets for horizontal storage of 5.5” deep models, P/N KAL-2 Magazine Racks for in-line automation with manual adjusting card guide • Compatible with many assembly lines • Rugged construction with steel reinforcing...

Adjustable Racks Magazine Racks for in-line automation with gear adjusting card guide • Fast and simple gear adjusting card guide to maintain parallelism and ensure accurate setup • Aluminum top and bottom • Zero flexing of card guides with steel reinforcing supports and molded ribs • Standard ABS model (N) tolerates 60°C, plus optional models to 120°C (M) and 200°C (H) • Surface resistivity of 10-4 to 10-6 ohm/cm • Removable end stop • Carrying handles on top and bottom **M = Metal, P = Plastic Higher temperature model numbers: 120°C is ‘M’; 200°C is ‘H’; e.g. B0103 GM is 120°C model

ESD Handling Trays Store and ship components and assemblies in these economical, rugged, stackable trays molded in .085” thick ESD safe plastic with surface resistivity below 10/6 ohm-cm and temperature tolerance to 60C. Four styles of trays some with several sizes. MS-Q11.1 Shown with optional divider Model # Outside Dimension Inside Dimension Four slots for dividers to create cavities 2-7/8” or 3-3/4” in length; optional dividers P/N MS-Q13 D Shown with four optional dividers Model # Outside Dimension Inside Dimension

Bench-top Assembly Fixtures Fancort has a wide variety of fixtures for circuit board hand assembly, rework and inspection that range from slide-lines for progressive assembly to stand-alone fixtures in a variety of configurations and sizes to meet almost any assembly Combo-Slide for progressive hand assembly • Adjustable capacity to hold 18” boards on a 20 degree working angle • Stations connect together at end panels and rails • Rugged construction of 1/16” steel with an attractive blue enamel finish • Very sturdy design for stability • Two styles of rails, one for PCBs, one for fixtures • Optional...

Mini-Flip for horizontal rework and inspection • Maintain boards horizontally to 6.5” high with four adjustable legs • One spring-loaded rail and one standard rail hold boards up to .150” thick • Two standard sizes: MF-8 holds boards to 8” x 12”; MF-12 holds boards to 12” x 16” • Custom sizes are available Bench-top Assembly FixturesMFM-24 low cost fixture for hand assembly only • One fixed rail and three adjustable rails; same profile as Combo-Slide rail • Hold up to three rows of boards • Comfortable 20 degree working angle; lightweight and portable • Measures 24” long x 16” wide • Rubber-tipped...

Production Accessories Fancort production accessories range from a unique ESD turntable to meet the stringent ergonomic needs of today’s production environment to stainless PCB cleaning baskets ESD Turntable for ergonomic assembly • Work on heavy, awkward assemblies without struggling • Complete ESD protection with surface resistivity of 5 x 10e6 • Hold up to 200 lbs • Rubberized conductive surface and plastic base in virtually any size and the most versatile lead reformer for DIPS to facilitate faster component insertion. PCB Cleaning Baskets • Manufactured in 330 stainless steel wire mesh with...

Heavy duty “nibbler” for removing tabs on boards up to .125” thick. • 2 tool steel knives for thousands of cuts A • neumatically operated with safety foot switch P • our magnetic, moveable posts to support the board F • ut round boards with a minimum radius of 3.5mm with C custom knife • crap chute and collection bin S • easures 4” x 4” x 7.5” M • achine with footswitch P/N is NTR-2; M • art number for knife is NTR-2K-X. X is the knife P thickness and should be .005” thinner than your routed slot. Production Accessories Finger Masks and Stiffeners Snap-on titanium strips for use as board stiffeners...