Roadheading Systems

ROADHEADING SYSTEMS ROADHEADERS TECHNICAL PARAMETERS FAMUR is a leading manufacturer of a wide range of the roadheading equipment for the mining industry. Our offer includes: > state-of-the-art roadheaders > dinting loaders and loaders > bolting and drilling rigs > fixed drilling rigs The roadheading equipment is available in various types and versions with intended drilling galleries in rocks of various hardness. Special versions of our roadheaders allow to cut rocks in quarries, old concrete foundations, quartzite sands and hard gangues on mine waste dumps. Our machines are also applied in...

AM-50z-w The AM-50z-w roadheader is a machine designed to excavate galleries in section up to 16.4 m2 (low version) and up to 22 m2 (high version), in rocks having a compressive strength up to 60 MPa. TECHNICAL PARAMETERS low version Machine length [A] high version permanent extension (wide) [F] Maximum cutting height [H] Cutting width Ground pressure Total installed power Cutting drum power Power supply/frequency ADVANTAGES   easy operation and maintenance   easy transportation of each component   easy underground assembly   surfaces exposed to wear are covered with materials      of great resistance...

R-130 The R-130 roadheader is a machine designed to excavate galleries in section up to 22 m2 (standard version) and up to 26 m2 (version with telescope), in rocks having a compressive strength up to 80 MPa. TECHNICAL PARAMETERS standard version 7900±50 version with telescope 8200±50 Apron width [D] permanent extension [E] permanent extension (wide) [F] Maximum cutting height [H] Cutting width Ground pressure Total installed power Cutting drum power   high productivity and reliability during exploitation   easy operation and maintenance   high maneuverability   very good cutting parameters in...

R-150 The R-150 roadheader is designed to excavate galleries is section up to 24 m2 in rocks having a compressive strength up to 95 MPa. TECHNICAL PARAMETERS Machine length [A] Cutting width Ground pressure Total installed power Cutting drum power Apron width [D] adjustable extension [E] adjustable hydraulic extension [F] Undercut [G] Power supply/frequency   high productivity and reliability during exploitation ergonomic display control system and high maneuverability   two types of haulage systems: electric with constant speed of 5 m/min or hydraulic with adjustable speed from 0 to 5 m/min...

The FR 160 is designed to excavate galleries in section up to 28 m2, both in useful minerals and gangues having a compressive strength up to 95 MPa. The machine is designed to operate in underground mines, in non-methane and methane fields with a longitudinal inclination up to ±18° and transverse inclination up to 5°, in ambient temperature of maximum +40°C. TECHNICAL PARAMETERS Roadheader width (apron without extension) [B] 2720 mm > load-dependent automatic boom movement speed control > simple navigation system > load-dependent hydraulic system - so-called LOAD-SENSING > LCD display > LED lighting...

R-2000 The R-2000 roadheader is a machine designed to excavate galleries in section up to 43,1 m2, in rocks having a compres-sive strength up to 110 MPa. TECHNICAL PARAMETERS standard version version with telescope Apron width [D] adjustable extension [E] adjustable hydraulic extension [F] Maximum cutting height [H] Cutting width Ground pressure Total installed power Cutting drum power   high productivity and reliability during exploitation   load-dependent automatic boom movement speed control   excavation guidance system and a programmable cutting       boom guidance system   machine states...

FR 250 The FR 250 is designed to excavate galleries in section up to 30 m2, in rocks having compressive strength up to 110 MPa. The machine is designed to operate in underground mines, in non-methane and methane conditions, with a longitudinal inclination up to ±18° and transverse inclination up to 8°, in ambient temperature of maximum +40°C. TECHNICAL PARAMETERS with transverse cutting head Machine length [A] Machine width (apron without extensions) [B] Machine height with axial cutting head 11700 3610 without operator shield [C] with roof support arch jack [D] Cutting width Ground pressure...

EZ-600 DINTING LOADER Due to its small dimensions and weight the EZ-600 is ideal for operation in small excavations. Auxiliary LOAD-SENSING system ensures considerable savings of the energy and reduction of the heat release. Electrical equipment compliant with the requirements of the EU directives is an explosion-proof design and can be used in the underground excavations with methane explosion hazard. TECHNICAL PARAMETERS Maximum machine length [D] Maximum machine width [S] Maximum machine height [W] Maximum height of bucket lifting Telescope travel Bucket capacity Unit ground pressure Electric...

EZ-800 DINTING LOADER The EZ-800 track-mounted dinting loader is used in the underground mining for levelling floor uplifted due to geological factors. It is indispensable for ripping floor in the galleries, for loading and crushing the excavated rock. Auxiliary LOAD-SENSING system ensures considerable savings of the energy and reduction of the heat release. Electrical equipment compliant with the requirements of the EU directives is an explosion-proof design and can be used in the underground excavations with methane explosion hazard. TECHNICAL PARAMETERS Maximum machine length [D] Maximum machine...

EZ-1200 LOADER The EZ-1200 track-mounted dinting loader is used in the underground mining. Typical applications of this machine operate in reconstruction sites and are used during loading works onto conveyors or cars in galleries. Due to its dimensions it is per fectly compatible with the EZ-W12 drilling rig, thus creating a set intended for cutting rock faces. Auxiliary LOAD-SENSING system ensures considerable savings of the energy and reduction of the heat release. Electrical equipment compliant with the requirements of the EU directives is an explosion-proof design and can be used in the underground...