TTC1000I CRUSHERCRUSHERS METAL SWARF The TTC1000idra crusher is a machine designed to crush long and coiled metal swarf, of different shape, composition and characteristics. It is a large and powerful machine, suitable for demanding and heavy tasks in terms of both quantity and quality. A hooked arm set in rotation inside the load hopper precrushes the swarf and conveys it to the actual crushing point. The crushed and shredded swarf is ejected from a specific discharge. The TTC1000 crusher is equipped with an automatic ejection system for non-shreddable pieces that consists in a side drawer controlled by a hydraulic cylinder. The unit is driven by a hydraulic motor with 30 kW hydraulic control unit. The reduction efficiency of the swarf volume and the hourly output of the TTC1000i crusher can be evaluated with experimental tests on your swarf at the headquarters of the company FAMA s.r.l. SWARF CHARACTERISTICS & TECHNICAL NOTES • The long swarf can appear scattered or in skein agglomerations • The swarf can be made of steel, iron, alloy steel (stainless), copper, brass (ecobrass), aluminium • The swarf may contain some sporadic pieces (bar ends or headers, processed parts, ...) which depending on the size will be shredded or automatically ejected • The loading process can be dosed by channel or by tipping from a container; SUPPLY • Structure and case made of sturdy painted metalwork • Blades and crushing counter blades in wear-resistant material • Automatic piece ejection system • Hydraulic control unit • Alternating direction crushing system • Uncoiler arm to convey the swarf to the crushing inlet • 30 kW hydraulic motor with hydraulic control unit • Electric panel OPTIONAL • Storage hopper for swarf loading with mirror • Storage hopper for swarf loading with laser level sensor Df LONG AND TANGLED SHAVINGS SMALL SIZE PIECE EJECTION FAMA RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCT WITHOUT NOTICE Uffici e Produzione/Offices and production site: Via Moraro, 19 - 36030 Montecchio Precalcino (VI) Italy- Tel.+39 0445 363950 fax +39 0445 386068 Sede Legale/ Registered office: Via S. Antonio,11- 36030 Fara Vicentino (Vi) Italy C.F./P.I.: IT 02290490248 Cap. Soc. € 100.000,00 R.E.A. VI 220095 www.famaproject.com e-mail [email protected]

TTC1000I CRUSHERCRUSHERSSTORAGE HOPPER Different types of hoppers can be installed on the top of the crusher, depending on the desired "buffer" volume and loading methods. Each storage hopper is complete with inspection door with safety microswitch and mechanical closure to access the shredding area. For the safety of personnel, with loading height less than 2.5 m, it is possible to install an automated closing system of the loading mouth, which prevents the crusher from working, when open. METAL SWARF POWER SUPPLY HOURLY PRODUCTION Q = 0,2 mc/h BRASS STEEL ALUMINIUM STAINLESS STEEL COPPER CAST...