The FAMA pneumatic delivery systems are designed to move the short and dry metal chips from one point of the company to another. The pneumatic delivery system is commonly used in FAMA s.r.l. plants to load the silos, if they are particularly far from the treatment area, replacing the bulky load conveyors with simple 3” or 4” pipes. The system is powered by a displacement pump, which provides enough energy to generate a fast flow of air, which transports the swarf. A dosing device continuously feeds the system to optimise transportation. With the FAMA pneumatic delivery system, one or more silos can be loaded in a fully automatic way. METAL SWARF FAMA pneumatic delivery systems feature the maximum versatility and extensibility and are suitable for any type of swarf, as long as they are short and dry. Implementing a pneumatic delivery system does not entail making civil works. CHARACTERISTICS • Allows the chip to be evacuated to the treatment or storage site • Transports the chip continuously, automatically and without the constant presence of an operator to control it • Allows unattended work SUPPLY • Displacement pump • Screw dosing device • Venturi Ejector • Sound-proof cabin • Anti-clogging sensor • Delivery main piping line in AISI304 stainless steel, complete with bends and couplings • Main electric panel, wiring and compressed air line OPTIONAL • Multiple delivery lines in case of multi-material • Anti-wear kit for venturi ejector • Bends with anti-wear extrados CO CONTINUOUS WORK UNATTENDED WORK LONG DISTANCE FAMA RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCT WITHOUT NOTICE Uffici e Produzione/Offices and production site: Via Moraro, 19 - 36030 Montecchio Precalcino (VI) Italy- Tel.+39 0445 363950 fax +39 0445 386068 Sede Legale/ Registered office: Via S. Antonio,11- 36030 Fara Vicentino (Vi) Italy C.F./P.I.: IT 02290490248 Cap. Soc. € 100.000,00 R.E.A. VI 220095 www.famaproject.com e-mail [email protected]

SYSTEMS OPERATION The system is operated by a pressure pump [A], which provides enough energy to push the swarf. This is transferred from the treatment to the storage area. A dosing device [B] acts as a lung to regulate swarf flow to the system and to balance the hourly production. A special device [C] converts the pressure energy into kinetic energy. The swarf coures along the line [D] to the storage site [E] (silo, detachable container, etc...). In the case of a single silo, the inlet is direct. In the case of double or triple silos, the wood chip inflow is managed by a cyclone separator, which...