HYDRAULIC SYSTEMSSYSTEMS DESCRIPTION FAMA hydraulic systems are systems designed to collect and transport swarf and cutting fluid directly from the machine tool to a centralised treatment point. The FAMA hydraulic system works continuously, automatically and without the need for the constant presence of an operator. It is a versatile and non-invasive system, easily extensible and modifiable over time. Among the main advantages of hydraulic systems, it is worth mentioning the elimination of all problems related to the movement of oil and swarf. The hydraulic transport system must then be completed with a cooling lubricant filtration and replenishment system. The construction of civil works may be necessary. METAL SWARF The goal is simple: a single centralized system that allows to remove swarf and coolant from lathes, milling machines, CNC machines continuously, automatically and without the constant presence of an operator to control it. CHARACTERISTICS • Allows the chip to be evacuated to the treatment or storage site • Transports the chip continuously, automatically and without the constant presence of an operator to control it • Allows unattended work OPTIONAL • Multiple swarf handling line in case of different types of material • Wear-resistant kit for centrifugal pumps • Cooling lubricant filtration system • Cooling lubricant super-filtration system • Cooling lubricant refrigeration system Oil and swarf collection tank with special booster pump, to be installed on the machine in place of or in combination with the machine tool tank Main piping line conveyor to recover swarf and oil; Collection tank with dredger for separation of swarf from oil Bends, valves, pressure transducers, special parts Low pressure oil reintegration line Main electric panel, wiring and compressed air line CO CONTINUOUS WORK UNATTENDED WORK LONG DISTANCE FAMA RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCT WITHOUT NOTICE Uffici e Produzione/Offices and production site: Via Moraro, 19 - 36030 Montecchio Precalcino (VI) Italy- Tel.+39 0445 363950 fax +39 0445 386068 Sede Legale/ Registered office: Via S. Antonio,11- 36030 Fara Vicentino (Vi) Italy C.F./RL: IT 02290490248 Cap. Soc. € 100.000,00 R.E.A. VI 220095 www.famaproject.com e-mail [email protected]

SYSTEMS OPERATION Each machine, to be connected to the system, will be equipped with an oil collection tank A or ], provided with a shredder D in case the swarf is long and skein-type. Each tank is equipped with a special pump that pushes swarf and oil into the manifold [E] via the pressure lines [B], each equipped with a manual emergency valve. The manifold directs the oil and swarf to the main collection tank [F]. Here, by decantation, the swarf settles on the bottom and is removed by a dredger. The swarf then undergoes its treatment and storage process. The oil/ emulsion can be filtered, super...