COLIBRÌ 3.0 is a compact unit for the centrifugal treatment of short metal chips, for the separation and recovery of the coolant. This is a standard group with reduced dimensions for the optimization of space in the company. It is composed of a belt conveyor specifically designed to contain a chip trolley. The side edges of the conveyor are suitable for unloading by forklift or by means of a small tipping lift. The short chips, wet with coolant, are loaded and dosed into the centrifuge Mod. FC300SL by the belt conveyor. The coolant recovered from the centrifuge is stored in the integrated dredging self-cleaning collection tank. The evacuated sludge is discharged into a small dedicated box. COLIBRÌ 3.0 is equipped with a sieve suitable for separating the bar ends or finished products which may be contained in the chips and which could damage the centrifuge. COLIBRÌ 3.0 is assembled on a palletized platform so as to be easily movable and is delivered already wired complete with electrical control panel with remote assistance and is ready for use. Open accumulation hopper for convenient chip loading Series part separation sieve Coolant collection tank, self-cleaning dredging version as standard Palletized base with containment rim Features compliant with Industry 4.0 plan requirements Centrifugal loading belt conveyor with accumulation, with raised side edges for loading Pieces separation vibrating screen installed upstream of the centrifuge FC300SL centrifuge Self cleaning scraping cutting fluid collection tank, complete with centrifuge washing pump, cooling lubricant booster pump, level sensor and sludge collection box Palletised base with containment sideboard Electrical control panel with inverter and remote assistance Discharge screw for FC300SL centrifuge PLUG & PLAY EASY MAINTENANCE FAMA RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCT WITHOUT NOTICE Uffici e Produzione/Offices and production site: Via Moraro, 19 - 36030 Montecchio Precalcino (VI) Italy– Tel.+39 0445 363950 fax +39 0445 386068 Sede Legale/ Registered office: Via S. Antonio,11- 36030 Fara Vicentino (Vi) Italy C.F./P.I.: IT 02290490248 Cap. Soc. € 100.000,00 R.E.A. VI 220095 www.famaproject.com e-mail [email protected]

METAL SWARF ELECTRICAL PANEL SELF-CLEANING DRAG TANK DIMENSIONS A - GROUND LONG SIDE SPACE 3220 mm B - GROUND SHORT SIDE SPACE 1400 mm C - MAXIMUM HEIGHT SPACE 2197 mm D - MAXIMUM LENGTH SPACE 3738 mm E - MAXIMUM WIDTH SPACE 1456 mm F - CENTRIFUGE DISCHARGE HEIGHT 882 mm G - DREDGER DISCHARGE HEIGHT 355 mm SWARF HOURLY FLOW RATE 50 - 400 kg/h HOPPER LOADING VOLUME 600 l Q = 0,2 m3/h BRASS STEEL ALUMINIUM STAINLESS STEEL COPPER CAST IRON A density [kg/dm3] 0,45 - 1 0,50 - 1 0,15 - 0,30 0,40 - 1 0,25 - 1 -Kg/h 90 - 400 100 - 400 30 - 120 80 - 400 50 - 400 The data in Kg/h are approximate and in...