UG027A HYDROPHILIC

Product catalog summary

Description:
The UG027A is a pre-cut elastomer gasket designed for sealing segments in construction. It is integrated into formwork before concrete casting and is manufactured using an injection moulding process. The gasket ensures high hydraulic seals with minimal pressure, even with misalignment or gaps between segments. It is designed to prevent concrete corner crushing and offers technical and economic advantages by reducing installation time and eliminating the need for glue.

Specifications:

Material: EPDM
Hardness: 65 - 80 ShA
Gasket Height: 17 mm
Gasket Length: 26 mm
Swelling Strip Diameter: 5 mm
Flash Point: Above 300°C
Recovery Capacity at 20°C: ≤ 80%
Relaxation from Compression (3 months at 70°C): ≤ 45%

The gasket can be customized according to client needs, and specific data sheets should be referred to for detailed requirements.

Catalog excerpts

HIGH INTENSITY OF INNOVATION FAMAS.p.A. Via della Fossa, 6 - 33090 Zoppola (Pordenone) - ITALY T *39 0434 079702 - F *39 0434 979870 nfo(®f amaspa.it - WA'.famaspa. it P.L- C.F..Oil2S6509S4C.C.I.AA PN n. 45107 Reg. Trib. PN n. 9471

Open the catalog to page 1

The UG027A is a pre-cut gasket made of elastomer. The anchored gasket is produced on the specific dimension of the segment that has to be sealed. It's integrated into the formwork before casting the concrete. The gasket is manufactured with injection moulding corner joints process and circumscribes the entire perimeter of the segment. The gaskets work by a proper mutual contact between two opposites profiles and allow both longitudinal and annular sealing joints. The gasket is designed according to the specific needs of hydraulic watertight. Due to its particular geometry and internal structure, the...

Open the catalog to page 2

UG027A HYDROPHILIC

UG027A HYDROPHILIC

Catalog excerpts

All Fama S.p.A catalogs and technical brochures