GLUED GASKET UG004B

Product catalog summary

Description:
The document describes a gasket made from elastomeric material based on EPDM rubber, designed to seal concrete segments. The gasket is manufactured using an injection moulding process for corner joints and encircles the entire perimeter of the segment. It facilitates both longitudinal and annular sealing joints, tailored for hydraulic watertight needs. Its unique geometry and internal structure ensure high hydraulic seals with minimal pressure, even with significant misalignment or suboptimal gaps between segments. The compression force remains within project limits, simplifying segment assembly. The design of the corner junctions ensures a perfect seal and reduces forces to prevent concrete crushing at the corners.

Specifications:

Material: EPDM
Gasket Height: 12 mm
Gasket Length: 33 mm
Hardness: 65 – 80 ShA
Flashpoint: Above 300 degrees C
Recovery Capacity: At 20° C ≤ 80%
Relaxation from Compression (3 months at 70° C): ≤ 45%

Additional Information:
The drawing and data provided represent a general example of the product, which can be customized according to the client's specific requirements. For precise details, refer to the specific data sheet based on the requirements.

Catalog excerpts

HIGH INTENSITY OF INNOVATION FAMAS.p.A. Via<lella Fossa, 6 - 33000 Zoppola [Pontenone) - ITALY T +39 0434 079792 - F +39 0434 979870 nfo@l amaspa.it - www.famaspa. it P.L- C.F. 0112S650934 G.C.I.AA PM n. 45107 Reg. Trib. PN n. 9471

Open the catalog to page 1

Material EPDM Gasket height 12 mm Gasket length 33 mm Hardness 65 - 80 ShA Flashpoint above 300 degrees C Recovery capacity at 20° C < 80% Relaxation from compression 3 months at 70° C < 45% DESCRIPTION The gasket is made of elastomeric material based on EPDM rubber used to seal concrete segments. The gasket is made with injection moulding corner joints process and circumscribes the entire perimeter of the segment. The gaskets work by coming into contact with each other and allow both longitudinal and annular sealing joints. The gasket is designed according to the specific needs of hydraulic...

Open the catalog to page 2

GLUED GASKET UG004B

GLUED GASKET UG004B

Catalog excerpts

All Fama S.p.A catalogs and technical brochures