ANCHORED GASKET UG018A

Product catalog summary

Description: The UG018A is a pre-cut elastomer gasket designed for sealing segments in construction. It is integrated into formwork before concrete casting and is manufactured using an injection moulding process for corner joints. The gasket ensures high hydraulic seals with minimal pressure, even with significant misalignment or gaps between segments. It offers technical and economic advantages by reducing installation time and eliminating the need for glue, thus preventing gasket expulsion and mortar infiltration.

Specifications: The gasket is made from EPDM material with a hardness of 65-80 ShA. It has a height of 14 mm and a length of 29 mm, with a flash point above 300 degrees Celsius. Its recovery capacity at 20°C is ≤ 80%, and relaxation from compression over 3 months at 70°C is ≤ 45%. The design ensures a perfect seal and reduces forces to prevent concrete corner crushing.

Water Tightness Test: The document includes a load deflection diagram for the UG018A profile, indicating its performance under pressure. The gasket can be customized according to client needs, with specific data sheets available for detailed requirements.

Catalog excerpts

HIGH INTENSITY OF INNOVATION FAMAS.p.A. Via Stella Fossa, 6 - 33094) Zappola [Pontenone) - ITALY T *39 0434 979792 - F *39 0434 979870 [email protected] - www.famaspa.it P.I.- C.F. 0112S650934 C.C.I.AA PN n. 45107 Ffeg.Trib. PN n. 9471

Open the catalog to page 1

DESCRIPTION – The UG018A is a pre-cut gasket made of elastomer. The anchored gasket is produced on the specific dimension of the segment that has to be sealed. It’s integrated into the formwork before casting the concrete. The gasket is manufactured with injection moulding corner joints process and circumscribes the entire perimeter of the segment. The gaskets work by a proper mutual contact between two opposites profiles and allow both longitudinal and annular sealing joints. The gasket is designed according to the specific needs of hydraulic watertight. Due to its particular geometry and internal...

Open the catalog to page 2

ANCHORED GASKET UG018A

ANCHORED GASKET UG018A

Catalog excerpts

All Fama S.p.A catalogs and technical brochures