THE ECO-SUSTAINABLE ALTERNATIVE
THE ECO-SUSTAINABLE ALTERNATIVE
The document describes an eco-sustainable alternative for manufacturing processes using an endothermic booth that operates without a burner. Heat is generated and distributed through radiant panels installed on the walls and roof, making it suitable for existing booths.
Specifications
The system uses 100% electrical panels, ensuring it is eco-friendly with no noise or emissions of flue and exhaust gases into the atmosphere.
Control System
The control panel allows for cyclical and programmed activation of the radiant panels, optimizing energy consumption and maintaining consistent surface temperatures. It also supports partial activation of panels to target specific areas during the painting and drying cycles.
Operational Phases
- Preparation Phase: The panels heat the plate to approximately 25/30°C within 3 to 5 minutes, depending on ambient temperature.
- Painting Phase: Radiation accelerates the dispersion of water and solvents in the paint, reducing flash-off times between layers.
- Drying Phase: With programmed ventilation, the panels quickly reach maximum temperature, raising the plate temperature to 70°C to facilitate complete drying.
Benefits
The system reduces labor costs and increases daily production by shortening working times. It also significantly cuts system management costs compared to traditional booths, with the added benefit of no atmospheric emissions.
Catalog excerpts
L’ALTERNATIVA ECOSOSTENIBILE La cabina con sistema endotermico lavora in assenza del bruciatore; il calore per le varie fasi di lavorazione viene generato e diffuso all’interno della cabina tramite dei pannelli radianti posti sulle pareti e sul tetto (plenum), riscaldando per irraggiamento il supporto da trattare. I pannelli sono facili da installare anche in cabine esistenti e sono semplici da utilizzare. Grazie alla versatilità del nostro quadro di comando, possiamo ridurre i costi di gestione attraverso l’accensione ciclica programmata dei pannelli radianti, in modo tale da mantenere costante...
Open the catalog to page 2
THE ECO-SUSTAINABLE ALTERNATIVE The endothermic booth works without burner; during the various phases of manufacturing, heat is generated and diffused inside the booth through radiant panels placed on the walls and on the roof (plenum), heating up the product to be worked through radiation. The panels are easy to install and use even in existing booths. Thanks to the flexibility of our control panel, we can reduce the operating costs, through the cyclical and programmed switch on of radiant panels, to maintain the temperature of the surface to dry unchanged, with the minimum power consumption....
Open the catalog to page 3
Pannelli 100% elettrici 100% rispetto per l’ambiente 0% rumore 0% fumi e gas di scarico in atmosfera 100% electrical panels 100% eco-friendly 0% noise 0% flue and exhaust gas into the atmosphere
Open the catalog to page 4All FAM srl catalogs and technical brochures
WORKING AREA FOR SMALL PARTS4 Pages
SMART TECHNOLOGY4 Pages
