water stills and purification systems W W W . FA LC I N ST R U M E N TS . I T

water stills and purification systems

classification and comparison water stills Glass water stills Glass water stills with external protective structure Water still in stainless steel water purification systems Reverse osmosis and deionized water systems Reverse osmosis and ultrapure water systems with control data system Reverse osmosis and ultrapure water systems High-volume water purification systems without storage requirements reverse osmosis and ultrapure water Diffeences among water purification systems

Reverse osmosis water (Type III) and Distilled water Pure/deionized water (Type II) Ultrapure water (Type I) DISAVANTAGES WATER No consumables • Instrument cleaning needed Suitable for university and school • If water is bad quality, the instrument has to be applications clean frequently • High energy and water consumption • It needs a technician to use the instrument • High temperature water in output High quality water • Consumables to change Easy using It can be connected to other instruments Low power (Eco-friendly) APPLICATION CLASSIFICATION REVERSE OSMOSIS PURE TYPE II ULTRAPURE TYPE I...

WATER STILLS Glass water stills Ideal for the production of distilled water (Type III) The structure made of borosilicate glass 3.3 ensures high quality of pyrogen-free water and metal ions The safety pressure switch is activated in the event of power supply failure The water outlet depends on the quality of the water supply and other environmental factors Wall mounted unit DIS Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C) Conductivity Bacteria Dimensions LxWxH Power Weight Code liters/hour liters/minute bar °C MΩ.cm μs/cm cfu/ml mm W...

WATER STILLS Glass water stills with external protective structure Ideal for the production of high-quality distilled water (Type III) The structure made of borosilicate glass 3.3 ensures high quality of pyrogen-free water and metal ions The external structure ensures a high level of safety for the user The water outlet depends on the quality of the water supply and other environmental factors Automatic filling device stops water and electrical supply when your tank is full HYDRO Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C) Conductivity...

WATER STILLS Water still in stainless steel Ideal for the production of distilled water (Type III) 18/8 stainless steel frame ensures water of high quality free of metallic ions and pyrogens Automatic level sensor in case of insufficient water The water outlet depends on the quality of the water supply and other environmental factors DES Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C) Conductivity Bacteria Dimension LxWxH Power Weight Code liters/hour liters/minute bar °C MΩ.cm μs/cm cfu/ml mm W Kg SPARE PARTS 10 lt tank in plastic HDPE...

Flush Full It is fit to produce reverse osmosis (Type III) and deionized/ pure water (Type II) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; chemical, clinical, microbiological tasks and molecular biology Standard pretreatment to protect membranes 3 procedures of the RO membrane's self-flushing: power on, water shortage and work more than 2 hours Bench top and wall mounted unit Technical data Flow rate Water outlet DEIONIZED WATER QUALITY liters/minute Up to 2 (with optional pressure tank 636.0800.28) 2: reverse osmosis water,deionized water RO WATER QUALITY...

CARTRIDGES Codes from 638.0800.22 to 638.0800.26 are included Replacement term 10" double water filter - If the tap water is hard water, TDS>200ppm_636.0800.20 Stainless steel flush filter - If the tap water is very dirty_636.0800.21 10" spun fiber filter_About 2-6 months_636.0800.22 10" granular active carbon filte-upgraded_About 4-6 months_636.0800.23 100GPD RO membrane filter_About 12-24 months (only for Basic Q 15)_636.0800.25 Mixed bed resin cartridge About 1000 liters/pc (2 pieces needed for Basic Q 15, 3 pieces needed for Basic Q 30)_636.0800.26 200GPD RO membrane filter - service life_About...

WATER PURIFICATION SYSTEMS Reverse osmosis and ultrapure water systems - with control data system It is fit to produce reverse osmosis (Type III) and ultrapure (water (Type I) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; HPLC, GC, IC, ICP, MS, AA, TOC analysis; pharmacological, molecolar biological and microbiological applications Colorful touch-screen controlling display Plastic external structure 3 doors to replace cartridges and mantaining the system Tube and adapter meet NSF certification RO system with DOW’s membrane High pure water quality and low...

Codes from 638.0805.20 to 638.0805.26 are included Replacement term 10” double water filter - If the tap water was hard water, TDS>200ppm Stainless steel flush filter - If the tap water was very dirty 5μm spun fiber cartridge 2-6 months Mixed KDF cartridge 12 months Granular active carbon cartridge 6 months 100GPD RO membrane filter 12-24 months/pc Low organic carbon cartridge About 9000 liters Double (254&185nm) wavelength UV lamp 9000 hours Ultra pure polishing resin cartridge 1000 liters (4 pieces needed) (0.45+0.1) μm importing PES terminal filter - TANK FOR REVERSE OSMOSIS WATER Pressure...

WATER PURIFICATION SYSTEMS Reverse osmosis and ultrapure water systems It is fit to produce reverse osmosis (Type III) and ultrapure water (Type I) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; HPLC, GC, IC, ICP, MS, AA, TOC analysis; pharmacological, molecolar biological and microbiological applications LCD contolling system Plastic external structure 3 doors to replace cartridges and mantaining the system Tube and adapter meet NSF certification RO system with DOW’s membrane High pure water quality and low running cost Double wavelength UV lamp (185&254nm)...