Unità di purificazione di acqua ultrapura
16Pages

{{requestButtons}}

Catalog excerpts

Unità di purificazione di acqua ultrapura - 1

water stills and purification systems

Open the catalog to page 1
Unità di purificazione di acqua ultrapura - 3

water stills and purification systems CLASSIFICATION AND COMPARISON Glass water stills Glass water stills with external protective structure Water still in stainless steel WATER PURIFICATION SYSTEMS Reverse osmosis and deionized water systems Reverse osmosis and ultrapure water systems with control data system Reverse osmosis and ultrapure water systems

Open the catalog to page 3
Unità di purificazione di acqua ultrapura - 4

CLASSIFICATION AND COMPARISON WATER PURITY CLASSIFICATION Tap water Reverse osmosis water (Type III) and Distilled water Pure/deionized water (Type II) Ultrapure water (Type I) COMPARISON BETWEEN WATER STILLS AND WATER PURIFICATION SYSTEMS ADVANTAGES WATER STILLS • No consumables • Suitable for university and school applications • Instrument cleaning needed • If water is bad quality, the instrument has to be clean frequently • High energy and water consumption • It needs a technician to use the instrument • High temperature water in output WATER PURIFICATION SYSTEMS High quality water Easy...

Open the catalog to page 4
Unità di purificazione di acqua ultrapura - 5

WATER STILLS Glass water stills Ideal for the production of distilled water (Type III) The structure made of borosilicate glass 3.3 ensures high quality of pyrogen-free water and metal ions The safety pressure switch is activated in the event of power supply failure The water outlet depends on the quality of the water supply and other environmental factors Wall mounted unit DIS Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C) Conductivity Bacteria Dimensions LxWxH Power Weight Code liters/hour liters/minute bar °C MΩ.cm μs/cm cfu/ml mm...

Open the catalog to page 5
Unità di purificazione di acqua ultrapura - 6

WATER STILLS Glass water stills with external protective structure Ideal for the production of high-quality distilled water (Type III) The structure made of borosilicate glass 3.3 ensures high quality of pyrogen-free water and metal ions The external structure ensures a high level of safety for the user The water outlet depends on the quality of the water supply and other environmental factors Automatic filling device stops water and electrical supply when your tank is full HYDRO Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C)...

Open the catalog to page 6
Unità di purificazione di acqua ultrapura - 7

WATER STILLS Water still in stainless steel Ideal for the production of distilled water (Type III) 18/8 stainless steel frame ensures water of high quality free of metallic ions and pyrogens Automatic level sensor in case of insufficient water The water outlet depends on the quality of the water supply and other environmental factors DES Technical data Output Flow rate Water pressure Water outlet Distillate temperature Ph Resistivity (25°C) Conductivity Bacteria Dimension LxWxH Power Weight Code liters/hour liters/minute bar °C MΩ.cm μs/cm cfu/ml mm W Kg SPARE PARTS 10 lt tank in plastic...

Open the catalog to page 7
Unità di purificazione di acqua ultrapura - 8

WATER PURIFICATION SYSTEMS Reverse osmosis and deionized water systems It is fit to produce reverse osmosis (Type III) and deionized/ pure water (Type II) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; chemical, clinical, microbiological tasks and molecular biology LED display monitoring running status External structure is in powder painting metal Tube and adapter meet NSF certification RO system with DOW’s membrane Bench-top and wall-mounted sytem High pure water quality and low running cost Standard pretreatment to protect membranes 3 procedures of...

Open the catalog to page 8
Unità di purificazione di acqua ultrapura - 9

Codes from 638.0800.22 to 638.0800.26 are included Replacement term 10” double water filter - If the tap water is hard water, TDS>200ppm Stainless steel flush filter - If the tap water is very dirty 10” spun fiber filter About 2-6 months 10” granular active carbon filte-upgraded About 4-6 months 100GPD RO membrane filter About 12-24 months (only for Basic Q 15) Mixed bed resin cartridge About 1000 liters/pc (2 pieces needed for Basic Q 15, 3 pieces needed for Basic Q 30) 200GPD RO membrane filter - service life About 12-24 months (only for Basic Q 30) TANK FOR REVERSE OSMOSIS WATER Pressure...

Open the catalog to page 9
Unità di purificazione di acqua ultrapura - 10

WATER PURIFICATION SYSTEMS Reverse osmosis and ultrapure water systems - with control data system It is fit to produce reverse osmosis (Type III) and ultrapure (water (Type I) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; HPLC, GC, IC, ICP, MS, AA, TOC analysis; pharmacological, molecolar biological and microbiological applications Colorful touch-screen controlling display Plastic external structure 3 doors to replace cartridges and mantaining the system Tube and adapter meet NSF certification RO system with DOW’s membrane High pure water quality and...

Open the catalog to page 10
Unità di purificazione di acqua ultrapura - 11

Codes from 638.0805.20 to 638.0805.26 are included Replacement term 10” double water filter - If the tap water was hard water, TDS>200ppm Stainless steel flush filter - If the tap water was very dirty 5μm spun fiber cartridge 2-6 months Mixed KDF cartridge 12 months Granular active carbon cartridge 6 months 100GPD RO membrane filter 12-24 months/pc (4 pieces needed) Low organic carbon cartridge About 9000 liters Double (254&185nm) wavelength UV lamp 9000 hours Ultra pure polishing resin cartridge 1000 liters (0.45+0.1) μm importing PES terminal filter - TANK FOR REVERSE OSMOSIS WATER...

Open the catalog to page 11
Unità di purificazione di acqua ultrapura - 12

WATER PURIFICATION SYSTEMS Reverse osmosis and ultrapure water systems It is fit to produce reverse osmosis (Type III) and ultrapure water (Type I) Applications: cleaning laboratory accessories; autoclave and test chamber supplying; HPLC, GC, IC, ICP, MS, AA, TOC analysis; pharmacological, molecolar biological and microbiological applications LCD contolling system Plastic external structure 3 doors to replace cartridges and mantaining the system Tube and adapter meet NSF certification RO system with DOW’s membrane High pure water quality and low running cost Double wavelength UV lamp...

Open the catalog to page 12
Unità di purificazione di acqua ultrapura - 13

Codes from 638.0805.20 to 638.0805.26 are included Replacement term 10” double water filter - If the tap water was hard water, TDS>200ppm Stainless steel flush filter - If the tap water was very dirty 5μm spun fiber cartridge 2-6 months Mixed KDF cartridge 12 months Granular active carbon cartridge 6 months 100GPD RO membrane filter 12-24 months/pc (4 pieces needed) Low organic carbon cartridge About 9000 liters Double (254&185nm) wavelength UV lamp 9000 hours Ultra pure polishing resin cartridge 1000 liters (0.45+0.1) μm importing PES terminal filter - TANK FOR REVERSE OSMOSIS WATER...

Open the catalog to page 13

All FALC Instruments S.r.l. catalogs and technical brochures

  1. INCUBATORS

    20 Pages

  2. FURNACES

    8 Pages

  3. THERMOBLOCKS

    12 Pages

  4. AUTOCLAVES

    16 Pages

  5. STIRRERS

    20 Pages

  6. TEST CHAMBERS

    24 Pages

  7. HEATERS

    16 Pages

  8. PHMETERS

    32 Pages