Quick Release Ball Lock Pins
46Pages

Dome Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-39 Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com

QUICK RELEASE BALL LOCK PINS Selecting the proper Quick Release Ball Lock Pin 1. Select the proper pin diameter. Our standard inch sizes are 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8”. Our standard metric sizes are 5mm, 6mm, 8mm, 10mm, 12mm and 16mm. We also offer 3/4", 7/8" and 1" diameters as special order. 2. Select the proper grip length. Grip Length The grip length (also referred to as the useable length) is measured from the bottom of the handle to the top of the locking balls. Our standard inch grip lengths range from 1/2" up to 6" and our metric grip lengths range from 10mm up to 100mm...

QUICK RELEASE BALL LOCK PINS Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com 3

QUICK RELEASE BALL LOCK PINS *Note: 300 Series Stainless is not recommended in applications where shear forces are a factor. These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. They are available in three shank materials to meet your application. The handles for the pins listed below are made from 380 aluminum casting with a...

QUICK RELEASE BALL LOCK PINS T'Handle I Inch (continued) MA MODIFICATIONS AVAILABLE *Note: 300 Series Stainless is not recommended in applications where shear forces are a factor. Part #_Part #_ 300 Series SS Nominal Part #_Diameter Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com 5

QUICK RELEASE BALL LOCK PINS These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. The shanks are available in 4130 steel with zinc plating or 17-4PH stainless steel. The handles for the pins listed below are made from 380 aluminum casting with a black finish. The pins are supplied with a stainless steel split ring for attaching...

QUICK RELEASE BALL LOCK PINS T'Handle I Metric (continued) MODIFICATIONS (AVAILABLE Nominal Diameter mm Grip Length mm Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com 7

QUICK RELEASE BALL LOCK PINS *Note: 300 Series Stainless is not recommended in applications where shear forces are a factor. These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. They are available in three shank materials to meet your application. The handles for the pins listed below are made from 380 aluminum casting with a...

QUICK RELEASE BALL LOCK PINS L'Handle I Inch (continued) MA MODIFICATIONS AVAILABLE *Note: 300 Series Stainless is not recommended in applications where shear forces are a factor. Part #_Part #_ 300 Series SS Nominal Part #_Diameter Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com 9

QUICK RELEASE BALL LOCK PINS These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. The shanks are available in 4130 steel with zinc plating or 17-4PH stainless steel. The handles for the pins listed below are made from 380 aluminum casting with a black finish. The pins are supplied with a stainless steel split ring for attaching...

QUICK RELEASE BALL LOCK PINS L'Handle I Metric (continued) MODIFICATIONS (AVAILABLE Nominal A Diameter Max Grip Length mm Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.fairlaneproducts.com 11

QUICK RELEASE BALL LOCK PINS *Note: 300 Series Stainless is not recommended in applications where shear forces are a factor. These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. They are available in three shank materials to meet your application. The handles for the pins listed below are made from 2024-T4 aluminum and anodized...

QUICK RELEASE BALL LOCK PINS Aluminum Button Handle | Inch (continued) Dia Hole Size Calculated Double Shear (lbs) Fairlane Products | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-6100 | Fax: 586-294-6822 | www.f

QUICK RELEASE BALL LOCK PINS These positive locking quick release pins have a wide range of uses in fastening, locating, and alignment applications. The pins will not release until the button on the handle is depressed. Once the button is depressed, the balls retract into the shank allowing the pin to be inserted or removed into or out of a hole. The shanks are available in 4130 steel with zinc plating or 17-4PH stainless steel. The handles for the pins listed below are made from 2024-T4 aluminum and anodized black. Stainless handles are also available. The pins are supplied with a...