pumps pompes pumpen

Impeller: The impeller design can be fully adapted to the kind of liquid to be pumped. By means of pressure-levelling holes, the impeller is axially relieved. The impeller is fixed on the shaft cone, which is a great advantage with diese - drive. The cone is designed to enable a very easy disengaging of the impeller. Pump casing: The liquid velocities in the pump have been ki*pt very low, which results in a minimum wear. The flanges may be drilled according to flange may be fitted in 4 positions with The sealing between pump casing, suction cover and casing cover with stuffing box Pump shaft:...

5. Spacer sleeve for bearing 7. Radial ball bearing 8. Radial ball bearing 11. Feltring in bearing cover p.s. 12. Feltring in bearing cover d.s. 17. Hexagonal socket set screw 42. Hexagonal socket set screw 43. Hexagon head cap screw 51. Casing cover with stuffingbox 52. Casing wear ring, delivery side 59. Joint for shaft sleeve 51. Casing cover with stuffingbox 52. Casing wear ring, delivery side 60. Joint for shaft sleeve 51. Casing cover with stuffingbox 52. Casing wear ring, delivery side 59. Joint for shaft sleeve 79. Casing wear ring, suction side 82. Joint for suction cover 83, Joint for...

NIJHUIS POMPEN B.V. - WINTERSWIJK - HOLLAND

Approx'mate dimensions