GFSO

GFSO
1 / 20 PagesView full catalog

GFSO

Product catalog summary
Introduction
FAI FILTRI has developed integrated systems for rotary and screw compressors, incorporating oil filters, oil separators, thermostats, and minimum pressure valves. These systems are designed for various industrial applications, offering ease of use, reduced maintenance costs, and extended maintenance intervals due to high-quality materials and improved oil contamination control.
Technical Data
Materials: The systems use painted and galvanized steel, glass microfiber, resin-impregnated cellulose fibers, oxidated aluminum, and brass components.
Pressure Values: Air/oil separation filters operate at a maximum pressure of 16 bar, while oil filters operate at 12 bar. Both are tested for pulsing fatigue pressure.
Filtering Elements: Tested for differential pressure, axial strain strength, and manufacturing compliance.
Separation Efficiency: Achieves residual oil waste of 1-3 ppm.
Operating Temperatures: Range from -20°C to +110°C.
Flow Rates: Air/oil separation filters handle 1 to 5.5 m³/min, and oil filters handle 20 to 70 l/min.
Assembly
Instructions include lubricating seals with oil and using a belt wrench for removal.
Air/Oil Separator Working Life
Replacement is recommended when differential pressure reaches 1-1.2 bar, with an average life of over 2500 hours.
Coalescence Effect
Utilizes borosilicate microfibers to agglomerate micro oil drops for collection and drainage.
Minimum Pressure Valve
Set at 4.5 bar to ensure lubrication during compressor restart.
Thermostat
Directs oil for cooling based on operative temperature settings.
Pressure Drop
Details on pressure drop for filters are provided, including formulas for kinematic viscosity variations.
Integrated Group Options
Models GFSO 10, 15, 20, 55, 56 are detailed with specifications for thermostats, clogging indicators, separator filters, and oil filters.
Specifications
The GFS 110 model supports an air flow rate of up to 11 m³/min, with separator filter options DSP300.0 and DSP400.0.
Dimensions
Dimensions for integrated groups with DSP400.0 and DSP300.0 separators are provided.
Spare Parts
A list of spare parts includes components like pivots, nuts, and O-rings, with part numbers for models GFSO10 to GFSO56.
Thermostatic Components
Details include thermostatic closing plugs, O-ring seals, and thermosensitive elements for various temperatures.
Pressure Components
Includes minimum pressure valve shutters, springs, and plugs with part numbers.
Indicators
Visual and electric differential pressure indicators are specified with a pressure rating of 1.5 bar.
See more

Catalog excerpts

GFSO-2

INTRODUCTION Thanks to many years of in-field experience regarding research, design and production of oil filters and oil separation for compressors applications, the high quality standard reached by FAI FILTRI has made it possible for the company to design and manufacture integrated groups equipped with oil filters and oil separators, thermostats and minimum pressure valves, suitable for assembly on rotary and screw compressors, which also allow a more and more accurate air cleaning in order to make it suitable for several industrial application such as: food industry, electronic, pharmaceutical...

 Open the catalog to page 2
GFSO-3

FILTERING ELEMENTS 5 bar collapse differential pressure tested in accordance with: Axial strain strength tested in accordance with Manufacturing compliance and first bubble point determination tested in accordance with : SEPARATION EFFICIENCY Oil residual in relation to speed and temperature Oil residual [mg/Nm3] Olio residuo [mg/Nm3] By avoiding overcoming suggested nominal flow rates it is possible to reach a residual oil waste lower than 13 ppm 5,0 4,0 Velocità flusso [m/sec] OPERATING TEMPERATURES FLOW RATES Air/oil separation filter: With an operating pressure up to 7 bars from 1 to 5,5...

 Open the catalog to page 3
GFSO-4

The compressed air flux polluted by solid particles and micro drops of oil passes through the first layer of borosilicate micro fibers . At this stage micro drops, smaller than 1 micron , are agglomerated to form bigger drops according to the coalescence principle and are therefore collected and drained by the second layer of porous and synthetic material and end up, due to gravity, on the dry side of the separator. Setting: 4,5 bar The minimum pressure valve is assembled on the GSO integrated group on the air/oil separator side or on the GS group. This valve has to stop the outlet compressed...

 Open the catalog to page 4
GFSO-5

Thermostat operative temperature: See table for choosing the operative setting The thermostat is assembled on the GO / GSO integrated group on the oil filter side. When set up temperature is reached the oil flux is diverted for cooling by the radiator. PRESSURE DROP Air/oil separation filter With nominal flow rate and 7 bars pressure the head pressure drop with a clean filter is up to 0,2 bars. Oil filter Curves are valid for mineral oil with kinematic viscosity up to 30 mm2/sec. (cSt). The P varies alongside the kinematic viscosity in accordance with the following formulas: Kinematic viscosity...

 Open the catalog to page 5
GFSO-6

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 10 Air flow rate: 1 m³/min Oil flow rate: up to 25 l/min Choice of oil filter integrated group – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 10 Clogging indicator Filtration type oil filter Without Visual diff. indicator Electric diff. indicator Separator filter Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of reinforced...

 Open the catalog to page 6
GFSO-7

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT012 oil filter and DSP012.0 separator filter Ø76 AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT025 oil filter and DSP012.0 separator filter Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)

 Open the catalog to page 7
GFSO-8

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 15 Air flow rate: 1.5 m³/min Oil flow rate: up to 50 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 15 Clogging indicator Separator filter Filtration type Oil filter Visual diff. indicator Electric diff. indicator Clogging indicator: Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of reinforced polyester

 Open the catalog to page 8
GFSO-9

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT050oil filter DSP050.0 and separator filter Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5

 Open the catalog to page 9
GFSO-10

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 20 Air flow rate: 2 m³/min Oil flow rate: up to 70 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 20 Clogging indicator Filtration type Oil filter Without Visual diff. indicator Electric diff. indicator Separator filter Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of reinforced...

 Open the catalog to page 10
GFSO-11

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT050 oil filter and DSP070.0 separator filter Dimensions integrated group equipped with CTT070 oil filter and DSP070.0 separator filter AIR/OIL SEPARATOR Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)

 Open the catalog to page 11
GFSO-12

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 55 Air flow rate: fino a 5.5 m³/min Oil flow rate: up to 70 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 55 Clogging indicator Separator filter Filtration type Oil filter Visual diff. indicator Electric diff. indicator Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of reinforced...

 Open the catalog to page 12
GFSO-13

Dimensions integrated group equipped with CTT070 oil filter and DSP300.0 separator filter AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT070 oil filter and DSP400.0 separator filter AIR/OIL SEPARATOR Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)

 Open the catalog to page 13

All FAI FILTRI catalogs and technical brochures

  1. FAP

    8  Pages

  2. FSD

    8  Pages

  3. CSP

    8  Pages

  4. FSP

    8  Pages

  5. SUE

    5  Pages

  6. INDICATORI

    8  Pages

  7. FDS

    8  Pages

  8. Disoleatori

    8  Pages

  9. SSRA

    4  Pages

  10. GSO

    36  Pages

  11. GSOM

    20  Pages

  12. MPV

    8  Pages

  13. CFE

    12  Pages

  14. FEC

    8  Pages

  15. ARIA

    16  Pages

  16. CSD

    8  Pages

  17. CSG

    8  Pages

  18. CS-CTT

    8  Pages

  19. FCS

    12  Pages

  20. FST

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.