FCS
12Pages

FCS series: in line filters with spin-on cartridges (SPIN-ON) with flow rates from 10 l/min up to 360 l/min and operating pressure up to 12 bar. FAI FILTRI technical team paid special attention to the engineering and manufacturing processes of these series during both the research stage and the production one . The research and experimentation both on the filtering media and on the mechanical parts of the FCS series was aimed to lower pressure losses, increase the filtration efficiency and improve the performances on the side of the retention of contaminants. This was made in order to match...

“P” 10 and 25 nominal micron made of px > 2 impregnated cellulose fibers2 “A” 3, 6, 10, 16 and 25 absolute micron made of px > 200 reinforced, inorganic fibers with polyester protections “M” 60 and 90 nominal micron made of wire net Epoxy wire mesh external support Epoxy wire mesh internal support RETENTION POWER In compliance with ISO 4572 Multi-pass test method Polyester internal absolute filtration “R” series Opening differential pressures 1,75 bar “S” series Opening differential pressure 0,2 bar (for suction lines) Other values custom-made only

GASKETS “A” in Buna-N Type “V” viton type gaskets COUPLINGS “G” Series GAS thread “F” Series SAE 3000 PSI flanging only for FCS 300-350 - FCS305-355 “N” Series NPT thread “S” Series SAE thread WORKING TEMPERATURES From -25°C up to +110°C [For different temperatures, please contact our technical department FLOW RATE From 45 up to 360 l/min N.B.: Choose the cartridge according to the filtration and to the recommended pressure drop VS Type VR Type ES Type Vacuum gauge with 0^76 cmHg scale Pressure gauge with 0^10 bar scale Vacuum gauge calibrated at 0,2 bar: Max operating...

PRESSURE DROP Curves are calculated in accordance with ISO 3968 and are valid for clean filtering elements. ∆P changes along with the density in presence of an eddy flow, and along with the dynamic viscosity in presence 3 of a laminar flux. Curves are valid for mineral oils with a density of 0,86 kg/dm and a dynamic viscosity of 30 2 mm /sec (cSt). When choosing the filtering medium consider the pressure losses deriving from the flow rate: Between 0,05 e 0,1 bar for suction line Up to 0,3÷0,5 bar for filters fitted on return line (The total pressure drop is to be calculated by adding up the...

DIMENSIONAL INFORMATION With electrical and visual indicators Intake filter indicator Scale: 0÷76 cmHg - VS Type Return filter indicator Scale: 0÷10 bar - VR Type Vacuum gauge with exchanging contacts Gauging: 0,2 bar - ES Type Manostat with exchanging contacts Gauging: 1.5 bar. - L1 Type Manostat with exchanging contacts Gauging: 1.5 bar - H1 Type Figure “O” changes along with the following indicators: ES-L1: 150mm H2: 142mm FCS 050 – equipped with N°1 CS050.0 FCS 070 – equipped with N°1 CS070.0 FCS 100 – equipped with N°1 CS100.0 FCS 150 – equipped with N°1 CS150.0 FCS 180 – equipped with...

For dimensional information about the indicators See previous page Figure “O” changes along with the following indicators: ES-L1: 130 mm H1: 120 mm FCS 300 – equipped with N°2 CS100.0 FCS 350 – equipped with N°2 CS150.0 FCS 380 – equipped with N°2 CS400.6

DIMENSIONAL INFORMATION With visual-electrical differential indicators Optical differential indicator Gauging: 1,5 bar - V1 Type Electrical differential indicator Gauging: 1,5 bar - Type: E1 Optical differential indicator Optical-electrical differential indicator Gauging: 1.5 bar - Type: E5

FCS 303 equipped with N°2 CS100.0 FCS 353 equipped with N°2 CS150.0 FCS 383 equipped with N°2 CS400.6 FUNCTIONAL DIAGRAM Suction lines Return lines By-pass valve Return: 1.75 bar Suction: 0,2 bar Return lines

Return lines Suction lines By-pass valve Return: 1.75 bar Return lines  Suction lines Return lines By-pass valve Return: 1.75 bar Suction: 0,2 bar Return lines

gg Type 050-053-055 070-073-075 100-103-105 150-153-155 180-185 See dimensional table Fi Iter element P10 10 e 25p P25 impregnated paper By-pass valve Without by-pass By-pass 1.75 bar By-pass 0,2 bar Gaskets With holes during intake + plugs With holes during return + plugs Visual indicator during intake Visual indicator during retrun Vacuum gauge 0.2 bar with exchange contact Pressure swith 1.5 bar with exchange contact Pressure swith 1.5 bar H1 with exchange rolling contact (360°)

II mondo Fai Filtri c diventato piii grande per offrirvi di piu Fal Filtri's world has grown bigger to offer you more and more FAI FILTRI s.r.l. - (Head Quarter) Strada Provinciate Francesca. 7 24040 Pontirolo Nuovo (BG) - Italy Tel. + + 39 0363 880024 -Fax ++39 0363 330177 faifiltri@faifiltri.it www.faifiltri.it FAI FILTRI Canada Inc. 2871 Brighton Road L6H 6C9 Oakville. Ontario - Canada Phone ++001 9058298037 Fax ++001 9058292039 faifiltri@faifiltri.com www.faifiltri.com FAI FILTRI Malaysia Sdn. Bhd 5, Jalan usj l/6c, su bangjaya 47610 Selangor Darul Ehsan Malaysia Phone 00603 8023...