Flow monitor for gaseous media The vent-captor 3201 .xx is a solid-state flow monitoring device for use in industrial airhandling applications. The vent-captor is a self-contained switch without any mechanical moving parts. The vent-captor can be simply installed by flange into any air flow and performs reliably even under the most harsh environmental conditions. • Precise switching flow monitor for gaseous media • Set-point adjustable from 1 m/s to 10 m/s • Operates on the calorimetric principle without moving parts • Temperature independent • Universally applicable • LED-display for output status • ISO 9001 : 2008 Technical Data Type Medium Sensor Data *1 Switching range Factory setting Medium temperature Ambient temperature Pressure Response time Temperature drift Repeatability Hysteresis Mechanical Data Protection class Material sensor probe Material housing Mounting accessories Electrical connection Body dimensions Electrical Data 3201.00 NPN n.c. currentcarrying 3201.xx gaseous media 1 m/s to 10 m/s, continuously adjustable Approx. 3 m/s -20 °C to +70 °C -20 °C to +70 °C With Flange: atmospheric, with PG21: max 1 bar Min. 3 s / max. 100 s depends on set-point adjustment < 0,5 % / K < 3% < 30% Ultradur (PBTP) Flange (PG21 on request) 2 m oilflex cable / 3 x 0,5 mm2 Standard version: 0 20 x 77,5 mm (D x L) NMA (verlangerte Form): 0 20 x 87 mm (D x L) Type Electrical output without flow: Operating voltage Switching current Starting override time *1 all data related to medium connection diagram since 1976 www.fae.it e-mail: [email protected] Technical data subject to alteration! REV. AC / 13.07.15