Flow meter for liquid and pasty media flow-captor 4114.30 The flow-captor 4114.30 is a flow meter for industrial applications which can be installed virtually non-intrusively into any pipe without obstruction of the pipe diameter. This flow-captor operates accordingly to a new developed calorimetric principle providing a wide measuring range. Completely epoxy resin encapsulated this flow-captor is a compact, rugged, shock and vibration resistant sensor with proven reliability and long-term stability, even under the most harsh environmental conditions. • Precise flow meter for water based media • Adjustable measuring range • New calorimetric principle without moving parts • Linear current output 4 - 20 mA • Housing and sensor head stainless steel WN 1.4305 / AISI 303 • ISO 9001:2008 certified manufacturing Technical Data Typ Medium Sensor Data *1 Measuring range Set-point range Medium temperature Ambient temperature Pressure Response time Linearity deviation Repeatability Temperature drift Mechanical Data Protection class Material housing / sensor Material of sensor probe Mounting accessories Electrical connection Dimensions Electrical Data Operating voltage Current consumption Current output Load * 1 data relate to water 4114.30 Liquid and pasty media (aggressive media on request) Continuously adjustable from 0 - 20 cm/s to 0 - 200 cm/s * Zero point and range adjustment by potentiometer - 10°C to + 80°C - 10°C to + 60°C Max. 30 bar 2 -10 s depends on measuring conditions < 5% best fitting slope < 2% < 0,3% / K IP65 stainless steel WN 1.4305 / AISI 303 (other material on request) FP (Viton) Union nut G 1 1/4 A, SW 50 mm (stainless steel WN 1.4305 / AISI 303) 2 m moulded oilflex cable 3 x 0,5 mm2 L = 109,5 mm; B = 32 mm 24VDC ±10% approx. 100 - 200 mA (at max. flow) 4 - 20 mA Max. 600Q Connection diagram: since 1976 www.fae.it e-mail: [email protected] Technical data subject to alteration! ■ Rev. AB / 01.07.15