Series 897 stainless steel tape measures Professional quality stainless steel and bi-material tape measures ► Stainless steel case ► Nylon blade and high strength hook ABS case - Nylon blade

Digital metrology Easy, efficient and reliable ► Efficient, reliable data transmission

Digital metrology Metrology - Introduction to the Standards - Vernier and digital caliper measurements from 0 to 2,000m. - Vernier or circular scale reading to 0.1 / 0.05 / 0.02mm. • Dimensional standard • Hardness of measuring surfaces. • Digital display measurements. - Rate of displacement > standard (0.5 m/s). - Error notification in case of : - Excessive speed. DIN 861- Part 1 - Outside micrometers - Standard design. Mechanical and digital display micrometer. • Dimensional standard. - Tolerance of flatness of measuring surfaces 0.6|im. - The locking lever must not alter the reading by more...

Digital metrology IGITAL DISPLAY EASY, EFFICIENT AND RELIABLE • Clear, easy-to-read LCD screen. • Quick and easy to operate. • Easier data transmission. - Protection against dust and liquids • For perfect reliability under all operating - IP x5 = Protected against water jets from • Any direction during for 3 minutes. • Patented inductive measuring system. • PC data transmission utility. Efficient data transmission • Gagewedge utility program developed for • Reliable data recording. • Saves time, simple , entire FACOM digital|£^^^^^^^B range. ffftffrTTi^n^^r^^ • Easy RS232 cable L-^^M^^M the measuring...

Digital metrology ► Digital depth gauge Digital depth gauge 300 mm - IP65 • Resistant to water and cutting oil - IP 65. - IP x5 = Protected against water jets from any direction • Ground stainless steel mechanism. • Reading scale with patented inductive measuring system • Floating zero. • mm/inch conversion. • Automatic shutoff. • Battery life approximately 3,500 hours. • Supplied in a case with a certificate of conformity. Capacity Resolution Repeatability Data transmission software - via cable 1300.C2 Available from www.facom.com or _upon request_ Outside digital micrometer 0-25 mm • Floating...

Digital metrology • mm/inch conversion. • Interchangeable M2.5 contact points. • Display pivots through 270. • Floating zero. • Allows measurements to be made using 2 separate references. • Measurement memorisation (display hold). • RS 232 connection - For transmitting reading to a statistical processing system. • Supplied with a FACOM certificate of conformity. Data transmission software - via cable 1300.C2 Available _from www.facom.com or upon request_ • This cable can be used to connect the various items of

Mechanical metrology IMPROVED PERFORMANCE • Dimensional regulation. • Hardness of measuring faces. • Accuracy and limit of error in \>m. • Standard of quality and readability of graduations. Technical specifications • Ground stainless steel • Lock screw for reliable readings without risk of • Vernier with guide. • Natural hand position. • Increased comfort. Perfect reading quality • Good contrast and anti-reflection. • Excellent readability. • Chemically formed graduation markings for perfect resistance to wear and chemical agents. • Supplied with a numbered certificate Outside measurement Inside...

Mechanical metrology Workshop vernier caliper to 1/50 mm • Inside and outside measurements (down to 10 mm bores). • Matt stainless steel rule. • Minimum rule hardness 40 HRc. • Vernier with thumb positioning guide. • Minimum vernier life expectancy 20,000 cycles. • Vernier screw lock. • Graduations resistant to chemical products. • Perfect contrast for optimum reading quality. • Supplied in a case with a certificate of conformity. Workshop vernier caliper to 1/50 mm - 300 mm capacity • Inside and outside measurements (down to 10 mm bores). • Matt stainless steel rule. • Minimum rule hardness...

Mechanical metrology Pocket vernier caliper to 1/10 mm • Inside, outside and depth measurements. • Screw lock. • Thumbscrew adjustment. • Matt rule. • Supplied in an individual FACOM wallet. ► Mechanical depth gauge 811 Mechanical depth gauges to 1/50 mm • Matt stainless steel rule. • Minimum rule hardness 40 HRc. • Measuring faces hardened to minimum 53 HRc. • Vernier with thumb positioning guide. • Minimum vernier life expectancy 20,000 cycles. • Vernier locked by fine adjustment screw. • Supplied in a case with a certificate of conformity. • Ratchet thimble with torque limiter : • Strictly...

Mechanical metrology Multi-range mechanical outside micrometer to 1/100 mm • Ratchet thimble with torque limiter. • Strictly limits the maximum force applied to the measured • Interchangeable fixed anvil. • Heat-insulating plates. • Anvil locking device. • Packaged in a wooden case. • Supplied with a certificate of conformity. Gauge block Friction mechanical outside micrometer to 1/100 mm • Ratchet thimble with torque limiter. • Strictly limits the maximum force applied to the measured • Anvil locking device. • Packaged in a plastic case. • Supplied with a certificate of conformity. Parallelism...

Mechanical metrology - 805.M Vernier caliper to 1/50 mm, capacity 200 mm. - 811 Depth gauge to 1/50 mm, capacity 160 mm, fine adjustment - 818B.15 Plain square 150 mm, class I. - 805.M Vernier caliper to 1/50 mm, capacity 200 mm. - 811 Depth gauge to 1/50 mm, capacity 160 mm, fine adjustment screw. - 818B.15 Plain square 150 mm, class I. - 819B.15 Flanged square 150 mm, class I. • Plunger travel 10 mm with totalizing pointer. • Interchangeable stylus. • Flat back can be replaced by back fitted with 8 mm lug. Back fitted with lug Steel ball stylus Long stylus 0 2 mm, effective length 15 mm • Shock...