MPI Series Inside-to-Out Flow Flushing Pleated Paper Filter Cartridges BENEFITS • • • Less expensive than coalescer cartridges More solids holding capacity than coalescer cartridges Less weight resulting in lower freight costs STANDARD DESIGN FEATURES • • • • • • Recommended maximum operating temperature: 240°F Maximum differential pressure: 75 psi Flow direction: Inside to out pH range from 5 to 9 Single-piece construction “Rod Mount” or “Screw base” options available The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator vessel during flushing on new systems or when there’s been repairs to the existing equipment. The elements are less expensive than coalescer elements and have more filtration media for better solids holding capacity. Benefits, features and materials of construction are similar to our MP Series filter elements, except designed to flow inside to outside same as coalescer cartridges. All metal components coated to protect against corrosion Gaskets are Buna-N—other materials available on request Metal outer shell and core DATA MODEL NUMBER MICRON RATING NOMINAL LENGTH OUTSIDE DIAMETER INSIDE DIAMETER MOUNTING STYLE SCREW BASE SCREW BASE SCREW BASE SCREW BASE SCREW BASE ROD MOUNT SCREW BASE SCREW BASE ROD MOUNT SCREW BASE ROD MOUNT SCREW BASE NOTE: Other lengths & micron rating available. ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. Aviation Cartridges & Housings Setting the Standard in Aviation Fueling™ www.pecofacet.com