FA Series Microfilter EI 1590 Qualified Cellulose to achieve the desired removal rating. The pleated filter media in the FA Series is supported by epoxy coated wire to ensure mechanical stability. BENEFITS • • • • Synthetic media provides high efficiencies, superior strength and durability One piece construction reduces downtime, cartridge change-out costs and eliminates filter bypass concerns Retention ratings available in 1, 2, and 3 microns All metal components are treated against corrosion. Spirally wound core reduces weight resulting in lower freight costs STANDARD DESIGN FEATURES • Flow rate: 4.69 gallon per minute/inch • Removal Efficiency: Effluent solids <0.15 mg/liter • Structural Strength: <72.5 psig MATERIALS Facet FA Series microfilters offer superior filtration for removing ultra-fine solid contaminants such as rust, scale, granular and other types of solids from aviation fuel systems. They are designed to flow from the outside to inside and qualified at a rate of 4.69 gallons (17.75 liter) per minute per inch of length. Filter Media: Micro Fiberglass/Cellulose, Wire-backed End Caps: Steel Powder Coated Center Tube: Spiral Wound Steel Powder Coated Gaskets: Buna-N Adhesive: Plastisol Facet FA Series microfilters are manufactured using proprietary combinations of Micro Fiberglass and FILTER SIZE AND DIMENSIONS MODEL FA-614-1 FA-628-1 FA-644-1 FA-614-2 FA-628-2 FA-644-2 FA-614-3 FA-628-3 FA-644-3 ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. Aviation Cartridges & Housings Setting the Standard in Aviation Fueling™ www.pecofacet.com