1. Catalogs
  2. Facet International
  3. Fuel-Gard VF-21SB/22SB Filter
video corpo

Fuel-Gard VF-21SB/22SB Filter
1 /2Pages

Fuel-Gard VF-21SB/22SB Filter

Fuel-Gard VF-21SB/22SB Filter
1 /2Pages

Catalog excerpts

Fuel-Gard VF-21SB/22SB Filter-1

Fuel-Gard® VF-21SB/22SB Filter Direct Reading Differential Pressure Gauge (Optional) STANDARD HOUSING DESIGN • • • • • • • • • Body: Carbon steel Aluminum Head Interior and exterior: Epoxy coated Design pressure: 150 psi Closure: Swing-bolt Closure seal: Buna-N o-ring—other materials available upon request Vent and drain connections with brass petcocks provided Inlet and outlet connections: 11∕2" NPT female threaded One filter cartridge installed VESSEL OPTIONS Housing only Housing w/Direct Reading Differential Pressure Gauge Housing Only Housing w/ Direct Reading Differential Pressure Gauge The Facet VF-21SB/22SB can be used as a filter housing. They are versatile, compact, light weight housings and provide superior in-line filtration protection. Mounting Bracket (Optional) Mounting Bracket Differential Pressure Gauge- The piston-type differential pressure gauge provides a simple visual warning. When 15 psi differential pressure is reached, the gauge indicator moves from green to red zone. This warning will prevent premature cartridge change-out. Both interior and exterior surfaces of the carbon steel body are epoxy coated to protect against corrosion. This sturdy, single cartridge housing is easy to maintain and requires only 2” (51 mm) base clearance for cartridge change out. ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. Aviation Cartridges & Housings Setting the Standard in Aviation Fue

 Open the catalog to page 1
Fuel-Gard VF-21SB/22SB Filter-2

VF-21SB/22SB Filter Cartridges Facet VF-21SB/22SB Series filter cartridges provide long service life and high solids holding capacity with no unloading characteristics. The filter cartridges remove solids from aviation fuels. STANDARD DESIGN FEATURES • 2 and 5 Micron Cartridges—other Micron ratings available upon request • Recommended maximum operating temperature: 240°F • Maximum differential pressure: 75 psi • pH range from 5 to 9 • Flow direction: Outside to in MATERIALS • • • DATA MODEL NUMBER 21 SERIES CF-609-2PLO CF-609-5PLO 22 SERIES CF-612-2PLO CF-612-5PLO Carbon steel structural components...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.