video corpo

CAA Model 5
2Pages

{{requestButtons}}

Catalog excerpts

CAA Model 5 - 1

CAA Series 5 Coalescer Cartridges Qualified to EI 1581, 5th Edition, Category C The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover. A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out. Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel. STANDARD DESIGN FEATURES • Tested and qualified to the Fifth Edition of EI 1581, Category C • Multi-layered media for increased solids holding capacity • Ultra-fine solids removal • Maximum water coalescence • Balanced cartridge flow characteristics • Recommended maximum operating temperature: 240°F (115oC) • Withstands in excess of 75 psi differential pressure • pH range from 5 to 9 • Screw base or open-end configuration The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, Fifth Edition, Category C (Category C replaces the previous class A, B, and C of API 1581 3rd Edition.) MATERIALS • All metal components are treated against corrosion • Screw base ends are injection molded, glass-filled nylon with locked-in gaskets • Buna-N gaskets—other materials are available on request FOR MAXIMUM WATER COALESCING EFFICIENCY AND SOLIDS HOLDING CAPACITY Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6” OD (152 mm) by 31∕2" ID (89 mm) and available in standard interchangeable nominal lengths from 111∕4" (290 mm) to 571∕4" (1450 mm). ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. Aviation Cartridges & Housings

Open the catalog to page 1
CAA Model 5 - 2

MOUNTING STYLE Rod Rod Screw Base Rod Screw Base Rod Screw Base Rod Screw Base Rod Screw Base Rod Screw Base Rod Screw Base NOTE: The Facet screw base adaptor part number is 677453A-AM. ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. Aviation Cartridges & Housings

Open the catalog to page 2

All Facet International catalogs and technical brochures

  1. FG Model 2"

    1 Pages

  2. Model MPI

    1 Pages

  3. Model M

    1 Pages

  4. Model FA

    1 Pages

  5. PF-CDPI

    1 Pages

  6. JetGard?

    4 Pages

  7. Fuel Monitors

    21 Pages