Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. FABULOUS
  3. BLUECARE
video corpo

BLUECARE

BLUECARE
1 / 2 PagesView full catalog

BLUECARE

Product catalog summary
Product Overview: BLUECARE is a composite powder based on polyamide 11, designed for use in powder bed systems via laser sintering. It is suitable for producing models and functional parts in the food industry, offering long life cycles and excellent chemical resistance.
Compliance and Applications: The material is food-contact compliant with EU N° 10/2011 and FDA CFR 21, and GMP compliant. It is applicable in the food, pharma, packaging industries, and safety equipment.
Chemical and Physical Properties: BLUECARE is a solid blue powder with additives. It has an average particle size of 45-65 µm and a packed density of 0.55 g/cm³. The material is insoluble in water but soluble in mineral acids and phenols.
Mechanical Properties: The material exhibits a Young Modulus of 1800 MPa and a flexural modulus greater than 1500 MPa. Tensile strength averages are 53 MPa (XY) and 45 MPa (Z), with elongation at break at 20% (XY) and 5% (Z).
Thermal Properties: The melting point ranges from 190 to 202 °C, with a process temperature around 186 °C. It has a flammability classification of UL-94.
Electrical Properties: Volume resistivity is 1 E+13 Ohms/m, and surface resistivity is 1 E+15 Ohms, classifying it as an insulator.
Safety and Handling: The material is classified as St2 in explosibility, with dust potentially forming explosive mixtures in air. It is safe for food use and features bio-sourced components.
Contact Information: FABULOUS SAS, Tech Center: 2 Avenue Roger Salengro, Carré de Soie, 69120 VAULX-EN-VELIN, FRANCE. Email: [email protected], Phone: +33 4.37.26.05.06.
See more

Catalog excerpts

BLUECARE-1

BLUECARE BLUECARE is a fine composite powder based on polyamide 11 (thermoplastic) especially formulated to function on powder bed systems by laser sintering (SLS, LS). It enables to obtain productions of models and functional parts for the food industry with long cycle of life and excellent chemical resistance. Applications examples : Typical features : PA11 Blue in the mass Food-contact compliant : Food industry Pharma industry Packaging industry Safety equipments Refresh rate : Safe for Food use Safety Blue for optical detection Bio-sourced components General Properties : Chemical Nature of the Preparation : Physical State (20°C) and Color : POLYAMIDE 11 formulation . Presence of additives grade = BLUE CARE Solid (powder) : Blue coloration in mass. Average Particle Size : Grain Size : Grain Size : Grain Size : Powder packed Density 23 ° C : Part Density : 23°C Moisture absorption 24 hrs : Method FABULOUS : Method FABULOUS : ASTM D570 0,55 +/- 0,05 g/cm³ (estimate) 1,02 +/- 0,05 g/cm³ (estimate) 1,12 +/- 0,05 % (estimate) Young Modulus* Flexural Modulus* Tensile strength (Average XY)* Tensile strength (Average Z)* Elongation at break (Average XY )* Elongation at break (Average Z)* Charpy – Impact strength* Mechanical Properties : statistics after several cycles The mechanical properties can vary according to the positioning of the tensile bars, operating conditions and exposure parameters of the systems used. These data rest on the current state of our knowledge. They do not give the exact characteristics of material and does not represent a guarantee. N°Siret France 799529383 00017 RCS Lyon +33 4.37.26.05.06 European VAT : FR 00 799529383 Tech Center : 2 Avenue Roger Salengro, Carré de Soie, 69120 VAULX-EN-VELIN - FRANCE

 Open the catalog to page 1
BLUECARE-2

BLUECARE Thermal Properties : T°f Melting Point : T° Process : According to machine Reading : Glazing Method Flammability – Fire Classification UL-94 following ASTM D618(ISO 921) with a barrel vertical & Horizontal test 125 x 13 x 13 mm Electrical Properties : According to the value reach in CEI 93 the material is considered as : ISOLANT Volume resistivity Horizontal surface Voluminal resistivity Vertical surface Voluminal resistivity Natural Coloration : Surface Ra/ Upper Facing processed & blasting : Surface Ra/ Upper Facing after Finishing : Surface Finish : Chemical Properties : Matrix in...

 Open the catalog to page 2

All FABULOUS catalogs and technical brochures

  1. VALUE
    VALUE

    2  Pages

  2. PURE
    PURE

    2  Pages

  3. DEEP
    DEEP

    2  Pages

  4. DARK
    DARK

    2  Pages

  5. DETECT
    DETECT

    2  Pages

  6. FLEX technical data sheet
    FLEX technical data sheet

    2  Pages

  7. ACTIVE
    ACTIVE

    2  Pages

  8. ACTIVE presentation
    ACTIVE presentation

    4  Pages

  9. BLUECARE presentation
    BLUECARE presentation

    7  Pages

  10. 3d printing Powders Range
    3d printing Powders Range

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.