Catalogs >
FABU Engineering Incorporation >
Pneumatic Tube Vibrator

Pneumatic Tube Vibrator
1Pages

Catalog excerpts

engineering inc. Pneumatic Tube Vibrator Operation Areas FABU PNEUMATIC TUBE VIBRATOR is used in media with hight viscosity such as mortar bath etc. to eliminate cavities and to obtain sound cast structure such as cast concrete. Operating Instructions - Secure vibrator end of the hose by hand and clean it by blowing air through before assembling hose to the vibrator. Repeat the cleaning process every time the hose is detached. - Use hoses which are in good condition. - Make sure compressed air network is equipped with lubricant containers. Do not allow water entering in to the vibrator. - Do not dismantle the vibrator while there is compressed air in. - When not in use keep the vibrator away from dust and moisture. - Please stick to the relavant regulations and guidelines (for use of vibrators) valid in your country. Technical Specifications Diameter of Vibrator Head Type Vibration Length of Vibrator Head Air Consumption Full Load Compaction Performance Name of Part Screw Cap O-ring Ball Edge Ball Stering Part cpl. Air Distributor Nozzle Compression Spring Check Valve Check Valve Cover Check Valve Ball Internal Hose Connection Cap Screw Hose Clip Inner Hose Vibrator Housing O-ring Housing Upper Part Clamp Protective Hose Hose Clip Exhaust Nozzle Retaining Disk Cone Sleeve O-ring Valve Body O-ring Handle Coupling Safety Strainer Gasket engineering inc. Pneumatic Tube Vibrator

Open the catalog to page 1