video corpo

Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools
4Pages

{{requestButtons}}

Catalog excerpts

Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools - 1

Page 1 Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools More than a crimping tool The new Fabco-Air 300 Series of pneumatic power tools is designed to perform numerous manufacturing functions, improving product quality and increasing productivity on the production line. Now you can tackle a variety of assembly applications with confidence.Typical applications for Fabco-Air crimping tools include: 4 Making plumbing assemblies 4 Splicing wire rope and cable assemblies 4 Crimping electrical terminals and connectors 4 Swaging mechanical fasteners 4 Staking, punching, piercing and flaring subassembly components 4 Sealing, embossing and notching assemblies 4 Special clamping and holding assemblies 4 Special custom applications Principle of Operation The patented Fabco-Air Multi-Power® cylinder uses multiple pistons attached to a common shaft. Each piston is isolated within its own chamber by means of baffles integral with the outer cylinder wall. Special internal porting through the rod allows air pressure to simultaneously energize all pistons to produce over 1700 pounds force directly to the cam and power head. Force is increased through the cam and jaws to approximately 4000 pounds at 1” away from the tool and approximately 2500 lbs at a 2” distance. The cut-away view illustrates the concept. Baffles are indicated with red arrows; power stroke air path is shown with yellow arrows. Quick-change jaws reduce set up time New Product Bulletin #FCT-JY07 Bench mounted tool Fabco-Air, Inc. n 3716 N.E. 49th Avenue n Gainesville, FL 32609-1699 11-18-09

Open the catalog to page 1
Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools - 2

Page 2 Features • Operating air pressure of 85 to 150 psi. • Normally closed jaw design for safety. • Foot pedal controls. • Hands free operation. • Light weight tools and control box. Can be brought to a remote point or centralized work bench area. • Incorporates positive cycle system to assure reliably repeatable operations. Performing Operations with Bench Mounted Tools Bench mounted Model BCT-300 is actuated by a foot operated control box. The tool’s jaws are spring loaded normally closed for safety. Foot pressure on valve A (shown in the photo above) opens the jaws for loading of the...

Open the catalog to page 2
Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools - 3

Page 3 Portable Assembly Tool at Work The Fabco-Air hand held crimping tool is light weight and completely portable. It delivers the same power as its bench mounted counterpart. Running on standard shop air pressure it accommodates all the different power heads (jaws). Dual triggers allow the tool to be operated using either left or right hand with or without gloves. Ergonomically balanced at the triggers, the tool is easy to use and minimizes operator fatigue. Power Heads: Power heads can be interchanged in less than a minute on either bench mounted or portable tools. Contact Fabco-Air...

Open the catalog to page 3
Work faster, neater and more reliably with the new Fabco-Air bench mounted and portable pneumatic crimping tools - 4

Page 4 Linear Slides - 6 Families Catalog # LS-03 ISO 6431 Cylinders Catalog # FAQR-09 Manifold Solenoid Valves Catalog # FVS.Y-09 Swing Clamps, Pneumatic & Hydraulic Catalog # FML.H Air Pilot & Solenoid Valves Catalog # FVA.E-09 Twin Rod, Non-Rotating Air Cylinders - Catalog # FDF-09 and Catalog # FDXS-09 Multi-Power® Air Presses Catalog # FP16 Pancake® II Air Cylinders Catalog Pan2-2 Pneumatic Grippers, Parallel Jaw and Angular Motion - Catalog # GR-8 Stopper Cylinders Catalog # ST-SC Swing Clamps Bulletin # SC-DB04 Square Pancake® II Air Cylinders Catalog # SqPan2 Cylinders, Valves and...

Open the catalog to page 4

All FABCO-AIR catalogs and technical brochures

  1. FKHT Series

    4 Pages

  2. FVH-16

    1 Pages

  3. FKHQ Gripper

    4 Pages

  4. Master Catalog

    200 Pages

Archived catalogs