NFPA Air Cylinders
16Pages

NFPA Air Cylinders Now Includes Optional Oversize rod information

NFPA Cylinders The dimensional interchange to NFPA Standards Cylinder Construction Head and cap are machined from solid aluminum bar stock and black anodized for corrosion resistance. Pressure rating: 250 psi max. Temperature limits: –10°F to +165°F. Tie rods are 100,000 psi minimum yield steel for maximum holding power. Threads are rolled for durability. Lubrication is a high performance synthetic grease with microscopic PTFE particles in suspension. Cushion has a flush, retained adjustment needle. Buna-N Nitrile Seals standard. Oversized nonmetallic, composite‡ rod bearing provides maximum...

This field can be blank. (or up to 8 characters max.) Note: The fields in the model number below this line must be filled. Model Number Cylinder Bore 15 = 1-1/2 20 = 2 25 = 2-1/2 32 = 3-1/4 40 = 4 50 = 5 60 = 6 Order NFPA Code Mounting Full inches of stroke XO . . . . MXO = Basic cylinder - no mount 00 = 0" F1 . . . . .MF1 = Head rectangular flange 01 = 1" F2 . . . . .MF2 = Cap rectangular flange 02 = 2" P1 . . . . .MP1 = Fixed clevis 03 = 3" P2 . . . . .MP2 = Detachable clevis 48 = 48" P3 . . . . .MP3 = Fixed eye 99 = 99"(Maximum) P4 . . . . .MP4 = Detachable eye Fractional inches of stroke 1...

Basic Cylinder Dimensions MXO - No mount Order Code XO ZB Plus Stroke LB Plus Stroke P Plus Stroke EE NPTF Head End View for 6" Bore and 3-1/4, 4, 5 & 6" Bore for Oversize Rod Head End View 1-1/2" thru 5" Bores Double Rod Cylinder - No mount Use option code “DR” for double rod cylinder available with the following NFPA mounts: MXO, MF1, MT1, MT4, MX1, MX3, MS1, MS2, MS4 or non-NFPA SN mount. Head End View 1-1/2" thru 5" Bores Head End View for 6" Bore and 3-1/4, 4, 5 & 6" Bore for Oversize Rod Approximate Cylinder Weights (pounds) Per Inch Stroke by Tube Material Basic Dimensions for Single...

Standard Rod Diameter Rod End Style #1 (Standard Male – KK Thread) Rod End Style #2 (Optional Male – CC Thread) Oversize Rod Diameter Rod End Style #6 (Standard Male – KK Thread) Rod End Style #7 (Optional Male – CC Thread) Standard Rod Diameter Rod End Style #3 (Optional Female) Oversize Rod Diameter Rod End Style #8 (Optional Female) Note 1: Bearing retainer is 2.00 Square x 0.375 Thk. "F" dimension. Specifications subject to change without notice or incurring obligations.

Flange, Clevis & Eye Mounts MF1 – Head Rectangular Flange Order Code F1 MF2 – Cap Rectangular Flange Order Code F2 Rectangular Flange Mount Dimensions (inches) Standard Rod Bore 11/2" 2" 21/2" 1/4" 3 4" 5" 6" MP1 & MP3 Fixed Clevis and Eye Mounts Order Codes P1 & P3 Pivot pins and retaining rings included. P1 View (Clevis) MP2 & MP4 Detachable Clevis and Eye Mounts Order Codes P2 & P4 Pivot pins and retaining rings included. P2 View (Clevis) Approximate Cylinder Weights (pounds) Clevis & Eye Mount Dimensions (inches) Specifications subject to change without notice or incurring obligations.

Trunnion & Extended Tie Rod Mounts MX2 – Cap Extended Tie Rods Order Code X2 MX1 – Extended Tie Rods Order Code X1 MX3 – Head Extended Tie Rods Order Code X3 Extended Tie Rod Mount Dimensions (inches) Std. Rod ‡ Note: Trunnion pins are removeable. User should apply thread locking adhesive on fastener at installation. MT4 – Mid Trunnion Order Code T8 MT1 – Head Trunnion Order Code T6 TD‡ Dia. MT2 – Cap Trunnion Order Code T7 Standard Rod Oversize Rod Minimum XI Min. XI Max. XI Max. Stroke XI Min. 3.063 3.063 + Stroke 3.438 3.438 + Stroke 0 3.188 2.938 + Stroke 3.563 3.313 + Stroke 1/4 3.188...

Sleeve Nut, Angle, Lug & Bottom Tap Mounts Sleeve Nut Mount Order Code SN SN - Sleeve Nut Mount Dimensions (inches) Std. Rod Approximate Cylinder Weights (pounds) MS1 – Angle Mount Order Code S1 XA Plus Stroke FH MS4 – Bottom Tap Order Code S4 MS2 – Side Lug Order Code S2 Specifications subject to change without notice or incurring obligations.

We Make Specials ! What do you need? Tell us. We'll go to work for you! • Strokes in decimal increments or longer than 48" (99" maximum) • Stop Tubes for longer strokes • Electroless Nickel Plating • Extruded Aluminum Cylinder Tube (Enclosed Tie Rods) • Hard Chrome Plated I.D. Steel Cyl. Tube • Custom Rod End Features • Additional Ports • Multi-Power® Cylinders (150 psi max) Fabco-Air attaches multiple pistons to a common shaft and provides internal air passages through the shaft to all pistons. Internal baffles divide the cylinder body into separate sections or stages. When air pressure is...

Magnetic Piston: Option -E • Option -E consists of a magnet affect the strength of the piston magnet bonded into the piston head. When therefore affecting sensor actuation and the piston magnet moves past an piston position indication. Labels noting external sensor, the magnetic field this are affixed to the cylinder. activates the sensor without physi• Mounting – The sensor is attached to cal contact. a 2-part clamp that attaches rigidly to a • Reliability – The annular piston tie rod and can be positioned anywhere magnet is permanently bonded into along the length of the cylinder for very a...

Accessories Guide to Part Numbers Clevis Bracket – Pivot pin NOT included Part No. NPM-11/2 NPM-31/4 NPM-6 NPM-10 NPM-12 Rod Clevis – Pivot pin NOT included Pivot Pin (Includes retaining rings) Specifications subject to change without notice or incurring obligations.

Accessories Alignment Couplers Alignment couplers can be used in both push or pull applications. Linear couplers can prevent binding caused by misalignment and allow a greater tolerance between the cylinder centerline and the mating part. Cylinder rod thread extension must be standard length for use with these couplers. Seal Kits – Standard Rods Bore Rod Bushings (Includes standard seals for the bushing only.) Insert “H” or “C” at for cushion at head end or cap end, or “HC” for both ends. Leave blank if none. For Viton® seal kits add suffix “V” to part numbers above. Consult factory for...