1. Catalogs
  2. FAAC SpA
  3. Automated systems for gates and barriers D600 - D700HS - D1000 24V

Automated systems for gates and barriers D600 - D700HS - D1000 24V

Automated systems for gates and barriers  D600 - D700HS - D1000 24V

Automated systems for gates and barriers D600 - D700HS - D1000 24V

Product catalog summary
Specifications:
The document outlines the specifications for the D600 and D1000 automated systems designed for sectional doors or spring/counterbalanced up-and-over doors. These systems are suitable for residential (D600) and condominium (D1000) use. Key features include a 230 Vac power supply, a 24 Vdc electric motor, and a thrust force of 600 N for D600 and 1000 N for D1000. The systems offer continuous use, with a maximum absorbed power of 220 W for D600 and 350 W for D1000. The dimensions are 360 x 200 x 145 mm, and they operate within a temperature range of -20 °C to +55 °C.
Procedures:
Installation is simplified with pre-installed rails and a tool-free setup using rotation coupling. The systems include a chain/belt transmission and adjustable travel limit electronic slow-down. A courtesy lamp with a maximum of 40 W is included, with a timing of 120 seconds.
Standards and Safety:
The systems comply with European Directives, featuring an anti-crushing device and intrinsic safety device. They are designed to eliminate the need for additional locks and bolts due to an anti-burglary non-reversing facility. The protection class is IP20, suitable for internal use only.
Accessories and Options:
Various accessories are available, including an emergency battery kit (XBAT24), flashing lamps, and key-operated external releases. Specific accessories for the Dolphin kit include different rail options with varying lengths and travel capacities. The document also lists item codes and prices for these accessories.
Recommendations:
It is recommended to conduct a specific risk analysis for each installation to determine the necessary safety devices, as these are not included in the configuration. Additionally, installation costs and preparations for masonry, electrical, and metalwork are not covered in the indicated price.
See more

Catalog excerpts

Automated systems for gates and barriers  D600 - D700HS - D1000 24V-1

D600 - D1000 Electromechanically-driven operator for sectional doors or spring/counterbalanced up-and-over doors, for residential (D600) and also condominium (D1000) use collegamento di terra non necessario • Anti-burglary non-reversing facility: there is no need to install locks and bolts. • Bi-stable release device (patented). • The anti-crushing device makes it possible to build automated systems conforming to European Directives. The safety edge is not necessary. • Quick, simple installation thanks to the pre-installed rail and installation of the automated system without any tools with rotation coupling. • Chain/belt transmission. • Adjustable travel limit electronic slow-down. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF d600 - d1000 D600 Power supply Electric motor Max. absorbed power Thrust force Type of use Maximum overall dimensions from ceiling Courtesy lamp Courtesy lamp timing Carriage standard off load speed Carriage reduced off load speed Carriage speed at slow-down Noise at standard speed Travel length at slow-down Intrinsic safety device Protection class Operating ambient temperature Dimensions (L x D x H) in mm D1000 230 Vac 24 Vdc 220 W 600 N 350 W 1000 N continuous 35 mm 230 Vac - 40 W (max) 120 s. 6.6 m/min 3.8 m/min 1.3 m/min 45 dB(A) variable from setup standard supply for internal use only (IP20) from -20 °C to +55 °C 360 x 200 x 145 TYPICAL INSTALLATION EXAMPLE 1 Ref. Q.ty Description A Low voltage cabling 1 cable 2x1.5*T N.B.: Cable sections in mm2. 74 1 1 1 D600 Dolphin kit 868 Single piece rail with chain travel 2,000 mm Receiver XF 433 / 868 Item code Price (euro) 10566515 390119 included 1 Transmitter 433 / 868 1 XL 24 flashing lamp 410017 1 Pair of photocelles 1 Key operated push button T10 401010001 Adaptor for counterbalanced up-and-over doors 1 GDA 2400 390548 Arm for sectional doors 1 Arm for sectional doors 390768 Notes ATTENTION: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific “risk analysis” of each installation. (Ref.: UNI-EN 12445 and 12453 European Standards). • The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations.

 Open the catalog to page 1
Automated systems for gates and barriers  D600 - D700HS - D1000 24V-2

SPECIFIC ACCESSORIES FOR DOLPHIN KIT Item code Price (euro) IMPORTANT: a rail (single piece or two pieces with belt or chain drive) must always be ordered with every D600 or D1000 operator. Packages contain: an electro-mechanical operator with control unit and timed courtesy lamp, installation accessories and internal release device. CONTROL UNITS SPECIFIC ACCESSORIES Built-in E 600 control board Built-in E 1000 control board Curved arm for sectional doors Price (euro)_ counterbalanced up-and-over Price (euro)_ Price (euro)_ Rail central support - supplied standard with two piece rails Price...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.