FTool watch-maker wire tool set Fast, precise, flexible, economic F-Tool watch-maker wire tool set The smaller the work pieces, the harder it is to clamp in a selected, aligned position. The F-Tool watch maker wire tool set is the right support, when flat plates or subtle stamps have to be clamped fast and accurate in the EDM wire cutting machine. Assembling - The watch maker wire tool set can be clamped fast and comfortable into the F-Tool basic rulers on the table. - Z-Support lies crash-free +2mm over Z-zero. - In combination with two clamping sets you can as well clamp larger plates in the working area range. Technical data - Rust resistant, hardened, precision ground stainless steel - External dimension: 120 x 120 x 12 mm - Clamping dimension: 60 x 60 mm - Opening for work pieces with diameters from 5 to 16 mm - Opening for stamp sizes up to 30 x 15 mm - 4 small brackets: 22 x 13 x 4 mm - Max. work piece size: approx. 80 x 80 x 1-20 mm Delivered in case with screws and keys Flat work pieces can be clamped on the Z-lip, 2 mm over Z-0, fast and absolutely collision-free. The flat brackets enable a narrow infeed of the wire guides. Subtle stamps or small work pieces can be clamped in the intended bag on Z-0. Diameters of 5 - 16 mm can be clamped precisely on Z-0 into the prism.

FTool universal clamping beam supporting plate F-Tool universal clamping beam supporting plate The F-Tool universal clamping beam supporting plates can be clamped directly on the machine table, without basic rulers. Miscellaneous table sizes and beam lengths can be bridged by movement on the side. In the single application you can add a FT 01906 Z-0 base plate to the supporting plate and use it as a clamping plate. FT 01906 FT 02149 F-Tool universal clamping beam supporting plate in the single application Head office: F-Tool International AG • Oberdorf 6 • P.O. Box • CH-5040 Schoftland • Switzerland...