Conical Whitening Machine for Rice Mode of operation Vertical whitening from top to bottom. The Verticone VPC operates with abrasive conical discs with air-feed openings in between. The small diameter of the conical whitening rotor is placed at the top, right underneath feeding section while the big diameter is placed at the bottom, before the outlet section. The product is conveyed to the machine by a vertical feeding pipeline. A conical distributor within the round inlet bin devides the product uniformly to the feeding worm which feeds the product into the whitening chamber. " The counterpressure ring which is adjustable connected by three springs in the outlet section causes an uniform filling ratio and uniform pressure within the entire working chamber. This ensures a gentle and uniform whitening of the product. Around the whitening chamber are distributed 3 adjustable brakes. These brakes assure a uniform filling ratio and whitening degree. As a optional feature you can use a ventilator for additionally cool pressed air. Air cools the product during the whitening procedure and supports the discharge of the bran. The bran is removed by a separate aspiration system. Verticone Inlet slide Inlet pipe Distributor Feeding worm Conical shelling silicate discs Air-feed openings Sieves Counterpressure ring with springs Outlet Aspiration Main drive motor Gap adjustment motor Ventilator pressed cool Air pipe Air inlet

The whitening degree is influenced by the following parameters: ■ Throughput capacity per hour ■ Gap adjustment between stones and sieves ■ Position of the brakes ■ Counterpressure ring Conical whitener for gentle milling of rice ■ State of the art conical milling concept ■ Abrasive silicate discs for buy lifetime ■ Low speed on top for gentle starting and less brokens ■ Variable gap-setting enabled by adjusting the height of the whitening rotor ■ New outlet design to avoid high pressure to the rice Technical Data Capacity Motor Capacity Air Capacity Bran Net Shipping Volume Cargo...