GTR Fine Cleaners The screens can be utilized for scalping, fine cleaning or grading according to requirement. Screen cleaning is achieved with the well proven "rubber ball system". Both screen boats are oscillated via a central eccentric system producing a 100 pct balanced motion. The drive can be supplied either with manual or frequency control unit. Capacity Screen Paddy Seed Wheat grain (ind. clean.) t/h t/h t/h GTR 12 GTR 14 GTR 15 GTR 16 GTR 17 GTR 18 GTR 19 1,5 3,0 4,5 7,0 12,0 15,0 30,0 2,5 5,0 7,5 10,0 20,0 25,0 45,0 5,0 12,0 20,0 25,0 30,0 45,0 80,0 Motors Aspiration Feed Screen Dyn. Loads Weight Weight Volume PH+/- PV+/- net gross m² kW kW m³/h N N t t m³ 3 7 10 15 18 24 38 1,12 1,12 1,12 1,12 1,12 1,12 1,5 1,5 2,2 3,0 4,0 5,5 5,5 11,0 4200 8200 9800 110003 110003 110003 30004 200 300 700 1100 1850 2400 1600 1000 1600 1200 2450 2750 3600 7500 1,3 1,9 2,1 2,7 2,8 3,5 8,0 1,5 2,3 2,5 3,2 3,3 4,0 8,5 9 13 15 21 24 28 39 The capacity depends on the waste quantity and the moisture content 1 other types on request 2 optional 3 can be delivered with closed circuit re-circulating pre- and after suction system reducing necessary air volume for aspiration to approx. 20 % 4 with re-circulation as standard Cleaners Type1

Type GTR 14 1. Inlet The agiator in conjunction with the ribbed feeding roller continuously feeds the material to be cleaned to the pre-suction system and disperse it in a uniform flow over the entire width of the scalping screen. The highly effective presuction system extracts light impurities from the material directly under the feeding roller. The extracted waste, dust and light weight trash is deposited in one of the two separate expansion chambers. 2. Feed Valve 3. Pre-suction system The aspiration opening of the pre-suction channel is adjustable thus permitting a variable air velocity....