*mydirectindustry

Catalogs
eyc-tech
eyc-tech L051 Submersible Pressure Transmitter

eyc-tech L051 Submersible Pressure Transmitter

Product catalog summary

Features:
This submersible pressure transmitter is designed for easy application in open containers and rivers. It provides level signals for both lower and upper limits and is suitable for use in drinking water equipment, pit sinking, wastewater plants, large containers, barrels, and flow currents in rivers and lakes. The housing is made of SS316 with a diameter of 27 mm, offering a compact and rugged design that is easy to install. It is priced reasonably with high accuracy and good long-term stability. The cable material options are PVC or PTFE.

Specifications:

Sensor Type: Piezoresistive diaphragm
Input Type: Level
Measuring Range: 0 to 10 bar
Output: 4 to 20 mA, 2-wire
Linear Accuracy: ±0.5% of Full Scale
Load Resistance: ≤ (Operating voltage 10V) / 0.02A - 0.15Ω x cable length (M)
Response Time: ≤ 5 ms
Operating Temperature: 0 to 50°C
Operating Humidity: 0 to 100% RH
Storage Temperature: -25 to +60°C
Zero-point Error: ±0.2% F.S. / 10K
Power Supply: DC 10 to 30 V
Current Consumption: ≤ 21 mA
Overvoltage Protection: < DC 33 V
Electrical Connection: Specific cable
Installation: Submersible
Protection: IP68 with polarity, over-voltage, and short circuit protection
Certification: CE, ISO 9001, ILAC/TAF
Material: Housing and wetted parts are SUS 316, cable is PVC/PTFE
Weight: 350 g (without cable)

Connection Diagram:
The transmitter uses a 4 to 20 mA output signal with a DC 10 to 30 V power supply. The connection involves a brown cable for input and a blue or green cable for output, depending on the configuration.

Ordering Guide:
The ordering guide provides options for pressure range, appearance, output, power supply, cable length, and cable material. Pressure ranges from 0.25 bar to 10 bar, with cable lengths from 5 m to 102 m, and cable materials available in PVC or PTFE.

Additional Options:
An optional test report from YUDEN-TECH CO., LTD. Calibration Laboratory is available, accredited by TAF and compliant with ISO/IEC 17025 standards.

Catalog excerpts

eyc-tech L051 Submersible Pressure Transmitter-1

Submersible Pressure Transmitter Housing SS316 outer, diameter 27 Ø Compact and rugged design and easy to install With reasonable price, high accuracy and good stability in a long-run Cable material: PVC or PTFE This submersible pressure transmitter is easy to apply in open container and rivers / Plunge the transmitter into the bottom of rivers and you can get level signal of lower limit and upper limit / Drinking water equipment / Pit sinking / Waste water plant / Big container and barrel / Flow current ( rivers and lakes )

Open the catalog to page 1

eyc-tech L051 Submersible Pressure Transmitter-2

Sensor type Piezoresistive diaphragm Measuring range Power supply Cable overload range Pressurs range Overload range Output Output Load resistance Electrical protection Response time (ZERO &SPAN)adjustment span Speciﬁc cable Signal connection Electrical connection Linear accuracy Overvoltage protection Input type ■ Polarity protection ■ Over-voltage Operating humidity Wetted part Response time Operating temperature Zero-point error Customer meter level transmitter | Connection Diagram | Power Supply DC 10 ... 30 V Storage temperature Customer meter PTFE cable Brown cable Heat-dhrinkage tube Gauge...

Open the catalog to page 2

eyc-tech L051 Submersible Pressure Transmitter-3

Pressure range Power supply Cable length Cable material | Additional Option Test Report | ■ILAC / TAF YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report. (TAF accreditation 3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA ： Project Pressure transmitter Measurand level or range

Open the catalog to page 3

eyc-tech L051 Submersible Pressure Transmitter

eyc-tech L051 Submersible Pressure Transmitter

Catalog excerpts

All Eyc-tech catalogs and technical brochures