Website:
eyc-tech
Catalog excerpts
Industrial High Accuracy Thermal Air Velocity Transmitter IP rating : IP67, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear calibration air velocity by computer, analog and RS-485 output High-speed, high-accuracy measurement, quickly respond Thermal mass flow sensor LCD, display air velocity and temperature Switch multifunction physical quantities : [m/s]、[ft/s]、[km/h]、[mph]、[kont] DIP switch and RS-485 function Follow customer needs to plan measuring range, analog output, stations, and zero-point OFF SET or RS-485 adjustment zero-point OFF SET Free programmable software : Data logger / Maximum record 65535 data / Charts Monitor air velocity in supplying gas consumption dry process in industry process / Compressed air consumption measurement / Building / Factory / Clean room / Hospitals / Semiconductor / Electronics / Paper / Printing / Textiles / Steel and iron Industry / Food / Chemical / Pharmaceutical / Biotechnology ind
Open the catalog to page 1
Sensor type Thermal mass flow sensor Measuring range Temp. sensor & measuring range Output Output Power supply Current consumption Electrical connection N type ( M16 metal cable gland ) Default output *M type with 2 m cable Signal connection Load resistance Response time Installation angle effect Display type Display range Duct / Remote LCD module with green black light Electrical protection ＜3% of the measured value (When the installation angle＜10°) Upon request, one decimal place, double line character ■ Reverse polarity ■ Over-voltage (Up : Air velocity, Down : Temp.) Thermal sensitivity...
Open the catalog to page 2
| Wind Tunnel Calibration System | The wind tunnel calibration system provides a stable and standardized environment for calibration, is not affected by external factors, and has an automated detection system to greatly improve calibration accuracy and reliability. It follows the operating standards of ISO/IEC 17025 and a calibration report can be purchased separately. N type (M16 metal cable gland) Length as request (Max. length : 5 m) Wire diameter : ∅5 ... 5.5 mm M12 connector or M16 metal cable gland
Open the catalog to page 3
Power supply Brown Black White Blue *Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product. For FTM84 / 85 products, the setting status of DIP switch will be read by software Output type 1.DIP switch active / deactivate : Set the DIP switch as On/ Off DIP Switch 1 Thus in order to read the DIP switch status again by software, the user must to reboot again if re-setting the DIP switch. The function of DIP Switch_2 to 8 only be effective while setting the DIP Switch_1 as“On” . Measuring range while power on, and this reading action...
Open the catalog to page 4
| Ordering Guide | Installation Remote probe cable Electrical connector / Option N : Metal cable gland M : M12 connector D : Display *M type with 2 m cable | Additional Option Test Report | For more detailed information please contact us. ■ILAC / TAF YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report. (TAF accreditation : 3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA Project Measurand level or range Measurand level or range
Open the catalog to page 5All Eyc-tech catalogs and technical brochures
-
2024 eyc-tech Catalog8 Pages
-
eyc-tech GM33 CO Transmitter4 Pages
