video corpo

eyc-tech FTE120-I Inline Type Air Flow Transmitter
6Pages

{{requestButtons}}

Catalog excerpts

eyc-tech FTE120-I Inline Type Air Flow Transmitter - 1

Inline Type Air Flow Transmitter Optional multiple output : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse ( Option ) Accuracy : ±2% F.S. , Operating pressure : Max. 10 bar Calibrated by sonic nozzles calibration system Multiple diameter ( DN10 / DN15 / DN20 / DN25 ), easy installation Polycarbonate housing, aluminum alloy pipe RS-485 programmable software : Data logger / Charts Pneumatic system / Compressed air system / Industrial machinery equipment Pipeline air flow monitoring

Open the catalog to page 1
eyc-tech FTE120-I Inline Type Air Flow Transmitter - 2

Sensor type Power supply Measuring range* Electrical connections Inline type *The measurement range is defined at the standard condition(1013 mbar, 20°C). This product is also calibrated at this condition. Output Signal Current consumption Minimum measuring range Overvoltage protection Thermal mass flow sensor Pulse ( 1 ... 100 l/pulse, option ) Electrical protection Response time Load resistance Medium operating Temp. / Humid. Operating pressure Environmental Housing operating Temp. / Humid. Storage Temp. Yellow Gray IP 65 (Housing) / IP20 (Probe) ■ Reverse polarity ■ Over-voltage |...

Open the catalog to page 2
eyc-tech FTE120-I Inline Type Air Flow Transmitter - 3

2 - Ø4.5 mm Suitable for M4 screws length above 25 mm Suitable for M4 screws length above 45 mm Suitable for M4 screws length above 50 mm Suitable for M4 screws length above 55 mm

Open the catalog to page 3
eyc-tech FTE120-I Inline Type Air Flow Transmitter - 4

■ It can be connected to air pipes through commercially available quick-connect adapters. The common thread sizes for adapters are G1/4" and G1/2", and the common pipe diameters for connections are Ø 4 ... 16 mm. ■ To ensure a stable flow profile inside transmitter, it is necessary to keep a straight pipe section during installation. The length of the straight pipe section can be referred to the "Installation Instructions" below. | Installation Instructions | 90° pipe ( Air passes through the pipe turn ) Tube expanding state ( Gas flow becomes large from small ) Shrinking tube state ( Air flow...

Open the catalog to page 4
eyc-tech FTE120-I Inline Type Air Flow Transmitter - 5

■ Data logger and Charts

Open the catalog to page 5
eyc-tech FTE120-I Inline Type Air Flow Transmitter - 6

| Ordering Guide | FTE120 - I - I : Inline type | Additional Option Test Report | For more detailed information please contact us. ■ISO 9001 Project Measurand leve

Open the catalog to page 6

All Eyc-tech catalogs and technical brochures