Shaft Support Block with Flange (PreCom IFWB Series) - Technical Summary

Product Overview

The document details the specifications for the PreCom IFWB series of shaft support blocks with flange, designed for various shaft diameters. These components are used to support shafts in mechanical assemblies, ensuring stability and alignment.

Product Types and Dimensions

The IFWB series includes the following types based on shaft diameter (Ød): IFWB-12, IFWB-16, IFWB-20, IFWB-25, IFWB-30, IFWB-40, and IFWB-50. Each type corresponds to a specific shaft diameter ranging from 12 mm to 50 mm.

Key Dimensional Parameters

• Ød: Shaft diameter (12 to 50 mm)
• A: Dimension related to flange or block size (values from 20 to 40 mm)
• L: Length parameter (values from 20 to 40 mm)
• ØD1: Outer diameter of flange or block (values from 23.5 to 65 mm)
• Ød1E: Secondary diameter parameter (values from 5.5 to 11 mm)
• V: Volume or related parameter (values from 0.06 to 0.70)
• SW: Width across flats or wrench size (values from 12 to 26 mm)

Weight

The weight of the shaft support blocks varies by size, ranging approximately from 0.06 kg for the smallest IFWB-12 to 0.70 kg for the largest IFWB-40.

Additional Dimensions and Parameters

Other dimensions such as D4, IF, W, B, and others are referenced but not fully detailed in the excerpt. These likely correspond to mounting or flange specifics.

Manufacturer Information

PreCom Precision Components GmbH, located in Blieskastel-Niederwürzbach, Germany, is the manufacturer. Contact details include telephone, fax, email, and website for further inquiries.

Summary of Critical Information

• The IFWB series supports shafts from 12 mm to 50 mm diameter.
• Dimensions and weights increase proportionally with shaft size.
• Key parameters include shaft diameter, flange dimensions, and wrench size.
• Weights range from 0.06 kg to 0.70 kg depending on size.
• Manufacturer provides detailed technical support and contact information.