Co-Extruder Typ EN 15 bis EN 38

1 / 1 PageView full catalog

Co-Extruder Typ EN 15 bis EN 38

Product catalog summary

Technical Specifications of Co-Extruder Types EN 15 to EN 38

Specifications:

Screw Diameter: Ranges from 15 mm to 38 mm depending on the model.
Screw Length (L/D Ratio): 25-30 for all models.
Screw Speed: 0-150 RPM for all models.
Drive Power: Varies from 1.5 kW to 17.5 kW.
Heating Zones: 3 zones for all models.
Heating Power: Ranges from 1.8 kW to 6 kW.
Temperature Control Points: 8 for all models.
Temperature Range: Up to 350°C.
Heating Bands: Standard is mica, ceramic available on request.
Temperature Sensors: Fe-Cu-Ni type.
Cooling: 3 fan cooling zones on the cylinder.
Feed Zone: Grooved for all models.
Extrusion Height: Approximately 1,000 mm, other heights available.
Operating Voltage: 230/400 V, 50 Hz.
Net Weight: Ranges from 420 kg to 610 kg.
Dimensions (without control cabinet): Height is 3,100 mm; footprint varies slightly between models.

Additional Information:

Custom configurations are available based on application needs.
All machines can be equipped with degassing.
Output performance is available upon request and depends on material type and tool dimensions.
Technical specifications are subject to change.

Catalog excerpts

Co-Extruder Typ EN 15 bis EN 38 Technische Daten - Standard-Extruder* Typ Heizbänder Standard Maße ohne Schaltschrank Höhe mm Grundfläche mm (Andere Höhen möglich) *Andere Konfiguration je nach Anwendung möglich. Sämtliche Maschinen können auch mit Entgasung geliefert werden. Ausstoßleistungen: auf Anfrage, abhängig von Materialtype und Werkzeugdimensionen. Technische Änderungen vorbehalten. Extrudex Kunststoffmaschinen GmbH In den Waldäckern 16 75417 Mühlacker / Germany Tel. +49 7041 9625-0 Fax +49 7041 9625-22 [email protected]

Open the catalog to page 1

Co-Extruder Typ EN 15 bis EN 38

Co-Extruder Typ EN 15 bis EN 38

Catalog excerpts

All Extrudex Kunststoffmaschinen GmbH catalogs and technical brochures